1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Finnished: LED Interior MOD (PICS)

Discussion in '2nd Gen. Tacomas (2005-2015)' started by BSP4x4, Oct 25, 2009.

  1. Oct 25, 2009 at 8:02 PM
    #1
    BSP4x4

    BSP4x4 [OP] Guest

    First and foremost: THANKS TO EVRYONE ON HERE WHO HELPED OUT!! Could not have done it without you.

    A hand made wiring schematic and think tank thread for this mod can be found here:

    http://www.tacomaworld.com/forum/2nd-gen-tacomas/57361-one-last-led-question.html(the last shematic is what i used).

    Also: if you are attempting this mod, you may want to pic up a haynes manual. (Unless you have taken the interior apart before). The manual is nice because it gives you a step by step tear down for the interior...with pictures! It's easier than it looks!

    This is not really a write up DIY, but more of an overview:

    Anyway, Got the LEDs from here:
    http://www.oznium.com/

    To be specific: 5mm Blue: http://www.oznium.com/prewired-leds

    Supplies:

    Assorted electrical accessories: but splices, heat shrink, 18g red and 18 g black wire. Wire stripper, drill (3/16th bit)., super glue, electric tape, on/off switch, mini add a fuse (10 amp fuses).
    [​IMG]


    Wired up the center console first. 1 LED in each cup holder, a little super glue, make sure the LED does not poke out too much.
    [​IMG]

    [​IMG]

    Much easier to wire the center console with it removed:
    [​IMG]


    Wired up 2 LEDs under the AC controls and 2 in the front door cup holders. The haynes manual will show you how to access these areas.

    Waiting for the switch to come in. Here is a few pics with most of the fron interior ripped out.

    [​IMG]

    [​IMG]

    [​IMG]

    Here are some night pics:

    Here is the drivers door LED, stock dash lights, and center console LEDs:
    [​IMG]

    Here is the center console, and passenger side door:

    [​IMG]

    Here are the rear cup holders and rear vent LEDs:

    [​IMG]

    Also picked up some LED map lights and a dome light from superbrightleds.com:

    [​IMG]
     
  2. Oct 25, 2009 at 8:09 PM
    #2
    Hoyal

    Hoyal Whiskey bent and hell bound.

    Joined:
    May 14, 2009
    Member:
    #17221
    Messages:
    18,114
    Gender:
    Male
    First Name:
    Devin
    N 39.2249 W -106.16974
    Vehicle:
    2000 4runner
    OME 3 inch suspension lift Toytec 1in body lift Rodger brown diff drop ARB front bumper Big tires, but want bigger! :) Xrc 8000 winch Hella3000 lights Deck plate mod Diff breather relocate Cb radio 1st gen roll bar Addicted sliders Spider trax wheel spacers.
    Looks good, lots of blue.
     
  3. Oct 25, 2009 at 8:10 PM
    #3
    uood8

    uood8 If You Search...You Shall Find.

    Joined:
    Jun 6, 2009
    Member:
    #18086
    Messages:
    1,372
    Gender:
    Male
    Greensboro, NC
    Vehicle:
    '16 Sr5 4x4 DCSB
    Pretty much stock
    looks pretty sweet
     
  4. Oct 25, 2009 at 8:12 PM
    #4
    ttylerr

    ttylerr Well-Known Member

    Joined:
    Jun 1, 2009
    Member:
    #17913
    Messages:
    833
    Gender:
    Male
    First Name:
    Tyler
    Fort McMurray, Alberta
    Vehicle:
    09 MGM 4Banger 4x4
    5% tint all around, Alpine IVA-W505, 16x8 Mojave Teflon Rims w/Hercules Terra Trac 265/75, Grillcraft Grill, Slimcubby HIDs, Front 5100's @ 0 w/Eibach 1.6" springs, URD Short Shifter, Extang Trifecta Tonneau Cover, Uniden Pro510XL and K30Mag Mount, Relentless Fab Bumper soon to come
    awesome, gotta get your gauges done now :)
     
  5. Oct 25, 2009 at 8:20 PM
    #5
    arod

    arod Member

    Joined:
    Jul 19, 2009
    Member:
    #19864
    Messages:
    19
    Gender:
    Male
    First Name:
    tony
    bakersfield ca
    Vehicle:
    07 prerunner reg cab
    K&N intake, flowmaster 40 series
    It looks FRESH! I like it.
     
  6. Oct 25, 2009 at 8:20 PM
    #6
    BSP4x4

    BSP4x4 [OP] Guest


    what color?
     
  7. Oct 25, 2009 at 8:33 PM
    #7
    tim920

    tim920 Never seen Forest Gump

    Joined:
    Aug 24, 2009
    Member:
    #21669
    Messages:
    1,573
    Gender:
    Male
    First Name:
    Tim
    Boston, MA
    Vehicle:
    2005 4Runner Limited V6
    That looks so cool! You should do the clock mod too. Someone on here did it.
     
  8. Oct 25, 2009 at 8:35 PM
    #8
    Sniper#830

    Sniper#830 Active Member

    Joined:
    May 12, 2009
    Member:
    #17151
    Messages:
    42
    Gender:
    Male
    Paso Robles, CA
    Vehicle:
    Tacoma / 4x4 / Off Road Package
    ICON Coil Overs & Bilstein 5100's, AFE Cold Air Intake, Pro-Comp Blk 7089 Rims, Dick Cepek Mud Country tires, SnugTop Shell, BHLM modification, Black Taillight LED modification, Blacked out grill, Skid Plate, Custom Kenwood Stereo System, Tinted Windows, TRD Seat Covers, Debadged, Borla CatBack Exhaust.
    Nice work dude.
     
  9. Oct 25, 2009 at 8:44 PM
    #9
    neslerrah

    neslerrah Taco lovin'

    Joined:
    Feb 18, 2008
    Member:
    #4803
    Messages:
    6,743
    Gender:
    Male
    First Name:
    Harrelsen
    Tucson
    Vehicle:
    5 lug BEAST!
    Secondary air filter removed, elbow mod, BFG T/A KO (31x10.5R15), 15" American Racing Mojaves, BHLM, Dome Light MOD (Blue), Pioneer headunit, Sockmonkey 'TACOMA' Decals, Readylift 5-lug SST, Rear Shocks - Bilstein TRD, Dynomax Super Turbo #17748, DDM Slim Ballast HID Kit H4 Hi/Lo -35W 6000K in headlights, Apexcone Raptor HID Kit H3 - 35W 6000K in Hella 500s, aFe CAI #51-10762, WeatherTech Floorliner, 200W Smart AC Inverter
    That is awesome. I still need to purchase myself one of the Hanes Manual.
     
  10. Oct 26, 2009 at 3:54 AM
    #10
    BSP4x4

    BSP4x4 [OP] Guest


    yeah...they help outa lot!
     
  11. Oct 26, 2009 at 4:13 AM
    #11
    Scosh

    Scosh Well-Known Member

    Joined:
    Sep 26, 2009
    Member:
    #23334
    Messages:
    197
    Gender:
    Male
    First Name:
    Scotty
    New Iberia
    Vehicle:
    02 Prerunner SR5
    Bilstein 5100's all around, Limo Tinted windows, Moto Metal 951 wrapped in Revo 2's 265/70/16, clear corners, dual Magnaflow muffler, Turn signal mod, more to come...
    Next stop, blue guages:)
     
  12. Oct 26, 2009 at 4:26 AM
    #12
    coppert

    coppert Mall Krawler

    Joined:
    Apr 12, 2007
    Member:
    #1300
    Messages:
    916
    Gender:
    Male
    First Name:
    Travis
    916
    I think the setup I have would look cool with your LED's...

    [​IMG]
     
  13. Oct 26, 2009 at 4:43 AM
    #13
    msaniac

    msaniac Well-Known Member

    Joined:
    Apr 12, 2009
    Member:
    #15896
    Messages:
    89
    Gender:
    Male
    Clemson, SC
    Vehicle:
    '09 DC 4x4 TRD Sport Longbed
    LED Bed Lights, Prodigy P3 Brake Controller, K&N Air Filter, Viper 5901 Alarm, Kenwood 9140 Headunit (Sirius/GPS/Backup Camera)
    Looks awesome man! Glad we could help. Easier than you thought right?
     
  14. Oct 26, 2009 at 6:04 AM
    #14
    BSP4x4

    BSP4x4 [OP] Guest


    for sure!
     
  15. Oct 26, 2009 at 8:03 AM
    #15
    tim920

    tim920 Never seen Forest Gump

    Joined:
    Aug 24, 2009
    Member:
    #21669
    Messages:
    1,573
    Gender:
    Male
    First Name:
    Tim
    Boston, MA
    Vehicle:
    2005 4Runner Limited V6
    Is there a switch to turn them on or off or is it on all the time?
     
  16. Oct 26, 2009 at 8:28 AM
    #16
    95SLE

    95SLE Starting to get cold outside

    Joined:
    Aug 5, 2009
    Member:
    #20718
    Messages:
    11,854
    Gender:
    Male
    First Name:
    Tom
    Maryland
    Vehicle:
    09 RWD Access Cab
    Custom XM Install, Window Tint, Intermittant Wiper Install, AVS Bug Deflector, Bed Mat, TRS FX-R retrofits, CIBIE fog and spot lamps, PIAA 510 lamps, Acess LE cover, Weathertech Digital floorr mats, LED interior lighting, Pioneer AVH-2300BT HU, Boston Acoustics speakers, JL Audio Amp, shorty antenna, leather wrap steering wheel cover, Viper security system.
    Did you use the 5mm LED's in the cup holders?
     
  17. Oct 26, 2009 at 8:47 AM
    #17
    aces2

    aces2 Senior Arshole

    Joined:
    Jun 5, 2008
    Member:
    #7120
    Messages:
    846
    Gender:
    Male
    First Name:
    Cody
    Hampton, VA
    Vehicle:
    08 SR5 RR AC 4x4
    Flowmaster 40, K&N CAI, RED brake light bulbs, BHLM, Rear dif breather line, Factory Skidplate painted BLACK, DRL's, YELLOW bulbs in Fogs Turn Signals and Marker lights, Custom "Toy Machine" center emblem, Sockmonkey "Nor-Cal" decals all BLACK, Redline tailgate damper and hood sruts, Painted steering wheel emblem BLACK, 12V always on, Foglight mod, 16" Pro-Comp 7089 rims BLACK powdercoated acorn lugnuts, BFG KM2's 285-75-16, Painted exhaust pipe BLACK, BLACK emblems all the way around, Rear BLACK bumper from base model, Radical RED "sport" grille-surround, Factory Toyota Bed extender, RED maglight mounted on each seat's side, TRD ball-type shift knob, Custom mounted Scangauge II under stereo, Aftermarket HU, Hardwired Garmin GPS 260W, TSB w/AAL and 2.5" 5100's, Weathertech floor liners, Removed front mud flaps, 95-04 "4WD" rear mudflaps, 3rd Brake light "TACO", BLACK front lip
    yuck-o! not for me, but if it makes you happy that's all that matters.
     
  18. Oct 26, 2009 at 9:19 AM
    #18
    BSP4x4

    BSP4x4 [OP] Guest

    Nice part is...they are wired to a switch on the dash....i can turn them off and on as i please! if a need a little mood lighting for making out with my wife...flick a switch and go to town!

    Yes i used the 5mm lights all around.
     
  19. Oct 26, 2009 at 1:06 PM
    #19
    95SLE

    95SLE Starting to get cold outside

    Joined:
    Aug 5, 2009
    Member:
    #20718
    Messages:
    11,854
    Gender:
    Male
    First Name:
    Tom
    Maryland
    Vehicle:
    09 RWD Access Cab
    Custom XM Install, Window Tint, Intermittant Wiper Install, AVS Bug Deflector, Bed Mat, TRS FX-R retrofits, CIBIE fog and spot lamps, PIAA 510 lamps, Acess LE cover, Weathertech Digital floorr mats, LED interior lighting, Pioneer AVH-2300BT HU, Boston Acoustics speakers, JL Audio Amp, shorty antenna, leather wrap steering wheel cover, Viper security system.
    TY. I am getting ready to do the same thing in Orange but I plan to wire them to the dimmer.
     
  20. Oct 26, 2009 at 1:19 PM
    #20
    BSP4x4

    BSP4x4 [OP] Guest


    I thought about this...but i like my dash lights on high, and would want to dim the extra LEDs...

    if you wire them to the dimmer it would control the dash lights and leds all as one right?


    Also could you use a fuse tap on the dimmer fuse or would you have to wire them up AFTER the dimmer?
     
To Top