1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fox 2.5 coilover with DSC

Discussion in '3rd Gen. Tacomas (2016+)' started by Paul 9.0, Sep 8, 2020.

  1. Sep 8, 2020 at 6:22 PM
    #1
    Paul 9.0

    Paul 9.0 [OP] New Member

    Joined:
    Dec 7, 2019
    Member:
    #312758
    Messages:
    2
    Gender:
    Male
    First Name:
    Paul
    Florida
    Vehicle:
    2019 Tacoma 4x4
    Hello I have been searching the threads for a few days under the fox coil-overs however I am not really sure on the measurements. I have 2019 Tacoma 4x4 had the suspension put on today and they made the front even on height front and back. it looks like they added too much pre-load to the fronts. Not sure how many threads should be counted to get close to 3 inches. I took measure from the pre-load ring up to the first starting thread on coil-over.

    Set is up 880-06-418 fox 2.5 w/DSC
    SPC UCA and Old Man EMU Dakar medium Duty

    20200908_211307.jpg
     
  2. Sep 8, 2020 at 6:23 PM
    #2
    08pretaco

    08pretaco Well-Known Member

    Joined:
    Sep 26, 2008
    Member:
    #9502
    Messages:
    9,304
    Gender:
    Male
    az
    Vehicle:
    2014 Tundra 4x4 CM 5.7L SR5
    @ADSracingshocks - F 3 point ohh / R 2.5 - w/clickers @camburgracing - uniball UCA @rigidindustries - 40" amber/white split, Dually XL, D2 @coopertires - 35/12.5/17 STT MAXX @bayareametalfab - low pro bed rack @toyotausa - 17" rock warrior @sdhqoffroad - rock sliders, a-pillar @hondogarage / @apple / @gaiagps / @dualgps- navigation @wheelersoffroadinc - superbumps
    Its typically: preload x2 = lift
     
    Paul 9.0 [OP] likes this.
  3. Sep 8, 2020 at 6:37 PM
    #3
    rj_taco

    rj_taco Well-Known Member

    Joined:
    Feb 28, 2017
    Member:
    #211935
    Messages:
    235
    Gender:
    Male
    Last edited: Sep 8, 2020
    Paul 9.0 [OP] likes this.
  4. Sep 8, 2020 at 8:51 PM
    #4
    Paul 9.0

    Paul 9.0 [OP] New Member

    Joined:
    Dec 7, 2019
    Member:
    #312758
    Messages:
    2
    Gender:
    Male
    First Name:
    Paul
    Florida
    Vehicle:
    2019 Tacoma 4x4
    Yeah took measurement from top hat to eyelet have 22 1/2'' and center hub to fender is 26" both sides. So it looks like I will need to bring down the pre-load
     

Products Discussed in

To Top