FS: 2020 Limited take offs and things, VA

Swapped out for color matched parts. All limited parts have ~1000 miles on them.

$200 shipped- Chrome door pulls for double cab. (Two smart key touch entry) SOLD

$50 shipped- Chrome Mirror caps SOLD

$45 shipped Fog bezels (Driver has one broken tab that looks to be easily re-attached)


$30 shipped- TRD sport take offs, bought these used before I knew I could get the chamfered corner covers in black



Prices are OBO

 

Your mirror caps were those the mirrors with the turn signals on them?

 

Yes, my mirrors have the turn signals in them

 

Are you selling the Limited wheels by chance?

 

Wasn't planning on it. But for the right price everything is for sale.

 

Ok, if you decide on a price I might be interested. Thanks

 

Hey! A fellow Norfuckian! Glws!

 

If you don’t mind me asking.... how much did you pay (parts + labor) to swap out all of the door handles? ....or did you do the install yourself? Thanks!

 

Parts were bought from Bosh Toyota online. Labor was myself. They are all super easy to swap.

 

Thanks for your reply!

 

Bump

 

On the door handles, are you able to separate the chrome from the painted part? I have sky silver and would need to have them color matched.

 

How difficult was it to remove the back door handles? I’m a little reserved but I know the fronts are easy.

 

Required going into the door. Dropping the latch to gain access to the rear cap fastener. Super easy if you wrench regularly. Not really hard even if you don't. Torque bit (star) required. Believe the caps are standard hex cap bolts.

 

Thanks I wish there was a how to
Vid
On YouTube

 

There was a thread in the 2nd gen forum. Pretty much the same process. Remove the door cards with a screw behind the door release, screw under the felt in the door pull hole and give them a decent yank to release the spring clips. Slowly pull off the vapor barrier to reapply later. Undo the three torque bit screws holding the latch, drop the latch down to access the outside door cap screw, remove that and then reassemble. If that's all you're doing 15 minutes per door.