FS: Relentless Fab Front Bumper

no longer available thanks guys

 

How much?

 

Pm'ed

 

Where is somewhat local?

 

Sorry about the previous comment. The whole post did load on tapatalk. Where you located?

 

if 505 is area code that is NW New Mexico I believe.

 

and his avatar appears to be a black and white version of the New Mexico flag

 

Because of the body lift is this going to sit 3" lower then a normal bumper on a non-body-lifted truck ?

 

Also powder coated or hand sprayed?

 

the bumper would sit 3 inches higher on a truck without a body lift.

how is it not rubbing the body or anything?

 

all questions answered in the OP

 

X2. I don't understand how it wouldn't be rubbing, as mine is a normal relentless and it rubs. But if the OP says it doesn't we gotta believe him.

 

i dont understand though. cause the bumper is bolted to the frame, and the body lift lifts the cab of the truck 3 inches. if you dont have a body lift your cab will be 3 inches lower. i dont know how a bumper made for a 3 inch body lift could work without modding it.....

 

The only part that sits lower is right below the trd cut out. so if you did have a bodylift it would compensate and mount flush. i dont have a body lift so it hangs just a little lower, other then that its sits just fine.

it has different mounting locations to adjust up and down so if there was a body lift it would mount up just fine.

i dont get no rub at all although i do have a 6" lift with 34.5s but i ran this bumper just fine when i had a 3" lift with 33.5s and ive stuff the tires and cranked it turning pretty good.

 

no longer available thanks guys