1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Gen II, Voltages at ADD Plug

Discussion in 'Technical Chat' started by koth442, Apr 22, 2018.

  1. Apr 22, 2018 at 8:31 AM
    #1
    koth442

    koth442 [OP] Active Member

    Joined:
    Apr 19, 2018
    Member:
    #251064
    Messages:
    35
    Gender:
    Male
    First Name:
    Leon
    Vehicle:
    2009 TRD Off Road
    Stock
    I'm troubleshooting my 4wd. I've got the 4 wheel drive and 4Lo lights flashing. The truck is stuck in 4-Hi. A couple days ago I took voltages at the plug in the different modes and they were all the same. I assumed the black wire w/ white stripe was ground. So starting with the red wire and moving "up" the connector I got the following voltages:

    Red GND ___ __ __ __
    0V 11V 0V 11V 11V

    I should have documented the other wire colors but I didn't. Now its raining like hell so I will update with proper wire colors when I get a chance. Anyone know what the voltages should be? More importantly, SHOULD THEY CHANGE? I didn't have anybody in the cab pushing in the clutch so perhaps my entire test is flawed...
     

Products Discussed in

To Top