++ Group Buy: Dirt Designs *2nd or 1st Gen* Shock Bucket Top Engine Crossover Bracket ++

To make decisions more complicated for you guys I searched through a bunch of pics and found a set of 1st gen mounts that i did to run secondary shock bypass and to possibly get over a supercharger. They look more similar to the 2nd gen mounts. He didnt have the super charger on but the plan was to bring the truck back when he got the s/c and if the tube didnt clear. He has not been back with a s/c on so not sure if it cleared, but you can look at the pics to get a better idea of where the tube can run. This style mount I do not need 5+ to make a run as they require the same setup as the 2nd gen mounts so we can add on however many of these we need for 1st gens.

The 1st version of the 1st gen crossover is stronger against frame flex as it runs a straighter tube across. But the 1st version does not have provisions to run secondary shock and may be harder to run over a s/c. I have not run a tube like the 1st version with the 2nd version shock bucket mounts. The angle forward might not work with the 2nd version style mounts.

If you email specify:
-2nd gen or 1st gen (version 1 or 2)
-wiy or welded

 

Siiiiiiccccckkkkk

Still 1.75" tube?

So in for this. I'll be getting a version 2. Secondaries!

Thanks man!

Only downside to both of these is no turbo for me now.

 

@Blackdawg Not sure what the best way would be to do it? I can add a second list in the second post for first gens. and wether you want version one or two to help out steve.

ALso if you're not on the list in the second post let me know. Not the end of the world if your not on the list since you just need to email steve but it would help for organization sake in here.

 

He said he was going to send me an invoice. You can include me.

 

No worries. I think I'm the only serious 1st gen and I'm getting the 2nd version so I get the discount anyways

 

I do need your email addy for invoicing through paypal. You can pay with paypal account or cc.

 

I never recieved an invoice today. Just want to make sure it doesnt get forgotten.

2nd gen welded, cpurevich@hotmail.com

 

I just sent out invoicing to everyone and I have the list together. We have enough people to do a run at the 20% off. We will actually start the run early next week to give other people enough time to get in on it. Does that work for everyone? No one needs it yesterday right? lol

 

Im not on a timeline at least, ha.

 

Should be fine. Sending email now

 

@dirt designs you could not have been more correct when you said this would make things even more complicated...hahaha!! But seriously, I'm somewhat confused on which generation and version I need.

I have a 2000 4Runner with a TRD Supercharger. I'm wanting to run my tube crossover over the top of the engine/supercharger (as seen in pic below).


So, if I'm understanding this correctly...

My order should be: 2nd Gen cause that's what you said I needed. And then an 2nd version so my crossover tube will fit over top of my supercharger?!?!

Is this correct?? Or am I ate up like a "football bat" and need to be schooled...hahaha!?!?


Thank you sir for all your help and patience. I assure you...it's much appreciated!!

- Russel

 

No you need the 1st gen version 2.



Invoice received and paided thanks Steve!

 

So what's the pricing for first gen type 2 WIY?
Heading up to SLO to visit the parents soon and would probably pick them up in person if possible

 

More like a hockey cleats. You need 1st gen tacoma 2nd version.

$80 wiy or $128 welded

 

Thank you @Blackdawg!! I knew I was going to get something wrong. Oh well, at least now I can email my order with confidence!! Now I read where yall said even though we are ordering 1st gen...we'll still get the 20% discount correct?

Edit: @dirt designs posted at the same time I did...and answered my question. Thanks !

Thanks again for your help!

- Russel

 

The 1st gen ver2 are so close to the 2nd gens steve is including them in the group buy discount as the minimum order has been met for the 2nd gens.

1st gen ver1 need 5 buyers.

In short. Your golden for 20% off!

 

You my sir...are full of all kinds of great news tonight !! I assure you...you're quickly becoming my new Hero..thank you!!

@dirt designs I have sent you my order through email. I'll be awaiting my invoice.

Thanks

 

DD...I recieved your invoice and you my friend...have been paid!

Thank you...
- Russel

 

I just sent Steve an email to see if I can get a 2nd gen set for my 4runner

 

Payment sent for 2nd Gen welded, looking forward to trying and make this fit with a supercharger