HELP! I need a photo of your 4x4 6 Speed Trans !!

Help TW,

So I am wrapping up my motor swap on 2nd gen (2005) and found out that I broke one of my connectors (shown below) if someone could please take a second to take a close up photo of the wires going into it or send me message telling me which color goes where that would be incredible !! there are only two wires. Thank you!!
It is most easily seen by looking at the connector from the driver side

 

This is from my 14 6-Speed. Hopefully it helps.

 

This is off a 2007 6 speed Tacoma.

 

Thank you so much !!

 

hahaha so close, its actually the connector that is being blocked from view by the round thing

 

well shit sorry.

 

No worries !! Thank you for taking the time to take a photo though!

 

11 TRD OR 6 speed manual

 

Thank you! great shot, looks like the white wire ends up the 1 position. hopefully she fires up ....

Thread closed

 

What do these wires do? Are they to the sensor which tells the truck if it's in hi/ lo range or something else? If it's that, then if you've done the yellow wire mod it may not matter. Just spitballing...

 

THank you all, got it wired up last night, works like a charm

THread closed !

 

Hey I need help with the name of that part, my drive shaft broke when I was on the expressway and hit that part should I change the whole transmission? Or just that part seems that it has two bolts and it can be taken out and put it back easily but I need more info thanks.