1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Installing fog lamps on 2nd gen. 4cyl. Wiring?

Discussion in 'Lighting' started by JOZ, Feb 10, 2010.

  1. Feb 10, 2010 at 4:23 PM
    #1
    JOZ

    JOZ [OP] Member

    Joined:
    Mar 2, 2009
    Member:
    #14237
    Messages:
    7
    Gender:
    Male
    New Hampshire
    Vehicle:
    05 2.7L
    I want to install a set of PIAA fog lights, the ones that have the halo ring, in the stock holes on my 05 taco. There is no bracket behind the plastic fillers in the stock holes. Any ideas? Also, there are two wires with connectors on the end that don't look to be running anything, but they are connected to the battery and stop towards the front of the bumper. The connectors have a "1" on the top of them. I already have the fog lights, but they were cut off my friends 4Runner, and he only left about 5 inches of wire on them. Will I be able to use them still?
     
  2. Feb 20, 2010 at 9:37 AM
    #2
    Cars0n`

    Cars0n` Well-Known Member

    Joined:
    Sep 8, 2008
    Member:
    #9091
    Messages:
    1,482
    Gender:
    Male
    First Name:
    Carson
    Edmonton AB
    Vehicle:
    07 2wd access cab base.
    Sold the ol girl
    yes, as long as they reach your battery connections. if not just strip back the insulation and solder a longer wire piece in there (of the same gauge)

    as for the connector im not sure what it is
     

Products Discussed in

To Top