kicker cvr 10's help

i am wondering what would the best amp be to run these subs in a double cab
Size (IN.,CM) 10, 25.0 Impedance (OHMS) 2 or 4 DVC Max Rec Amplifier Power (WATTS PEAK/RMS)* 800/400 Sensitivity (dB 1w/1m) 83.6 Frequency Response (Hz) 25-500 Mounting Depth (IN.,CM) 5 1/2, 14.0 Mounting Cutout (IN.,CM) 9 3/16, 23.3 Min Rec Sealed Box Volume (CU. FT., Liters) 0.8, 22.7 Max Rec Sealed Box Volume (CU. FT., Liters) 3, 85 Min Rec Vented Box Volume (CU. Ft., Liters)** 1.25, 35.4 Max Rec Vented Box Volume (CU. Ft., Liters)** 1.75, 49.6

 

depends what VC config you choose, and there isnt really a "best"

higher ohm loads=less thd but i doubt your that concerned (especially with subs)

 

im runnin 1000 watts to my 2 kicker cvt 10s and i couldnt imagine wanting more bass. in a doublecab too

 

I have 2 10" CVR's that are 2ohm vc. Running a MTX Thunder 600x1 sub amp. Hits very hard. This is installed in a regular cab also... Saves me money on getting back massages hehehee

 

lol i got a 1200 watt after all and it was more than enough

 

Big difference between brands here......