1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

looking for 4.10 front and rear

Discussion in 'Performance and Tuning' started by pherpher1985, Sep 25, 2008.

  1. Sep 25, 2008 at 3:07 PM
    #1
    pherpher1985

    pherpher1985 [OP] Member

    Joined:
    Jun 26, 2008
    Member:
    #7573
    Messages:
    7
    tulsa
    Vehicle:
    1998 Tacoma ex-cab SR5
    I have a 1998 Tacoma with a 2.7 and 3.58 gears. Those high gears are robbing me of power. Does anyone know where I could find complete front and rear ends out of a Tacoma with 4.10's? I was under the impression that some came factory with these. Thanks
     
  2. Sep 27, 2008 at 8:45 PM
    #2
    pherpher1985

    pherpher1985 [OP] Member

    Joined:
    Jun 26, 2008
    Member:
    #7573
    Messages:
    7
    tulsa
    Vehicle:
    1998 Tacoma ex-cab SR5
    Or does anyone know which years the 31x10.50's were a factory option on tacomas? I know that those trucks had 4.10's. Thanks
     
  3. Sep 28, 2008 at 9:12 PM
    #3
    350TacoZilla

    350TacoZilla Well-Known Member

    Joined:
    Sep 22, 2007
    Member:
    #2767
    Messages:
    1,106
    Clear Spring MD
    2.7L 3RZ,K&N filter, 4" deck plate mod,flowmaster 40 series,3" body lift,3" suspension lift,35's. I also have another tacoma a 97 with a 350 small block in it on a 1972 blazer frame...
    the tacomas came with tons of different gears.. 3.58 3.90 4.10 4.30 and even 4.56 on 95.5 2.4L auto 4x4's lol on ebay there are tons of center sections for sale with gears installed...be alot cheaper to just go to a junkyard and pull a set of axles or get new gears and swap them in
     
To Top