Looking for help

I'm wanting to relocate my license plate to my tailgate. Want to mount it in the upper driver side but need to find a mount with a light that I can mount to my tailgate 1st. Anyone know of anything? Marlin of Marlin Crawler has a cool one on his truck so I know they are made but I'm only finding things for jeeps....

 

http://www.trail-gear.com//product/4770/license-plate-holder-kit-1-5-od

?? You'll have to figure out on how to mount it... TG tho

 

Here’s how I did mine I just drilled some screws in it and my girlfriends dad gave me a light from his work just drilled that and ran the wires through the tailgate

 

Looking for something different than that, I don't even know if what I want is still made or not

 

This is pretty much what I want!

 

Buy a license plate light mount things where you want

I made my own bracket .

 

Here is what I have mounted to my back window guard

 

Check a motorcycle sp they sell little mounting bolts with LEDs inside

 

What shackle kit are you running? does it still let you torque down your bolts like the factory set up?

 

I have toytec shackles. I didn’t torque them or anything just tightened them until they were snug.

 

do they reuse factory bolts? or replace them?

 

I believe they came with new bolts for them. My stock shackles had to be cut out so I know i didn’t reuse those bolts

 

I just went and looked the kit up holy cow that is a spendy kit looks super beef if I end up needing to run longer shackles after I have a cage and tent and everything ill look into getting one.

 

Not going to lie I bought them so long ago I didn’t even realize they cost that much. Could’ve sworn they were like 100 bucks. But I also bought my leaf pack used for 100 and it was only good for 1.5” of lift new, that’s why I bought the shackles. Plus my stock shackles were seized to the stock leaf pack. I had to cut those out anyways. Their huge though.

 

I believe what he wants is a flush in place tailgate.

 

Is your bed cut

 

This is what I'm looking for. frame/mount/light all in one

 

https://www.speedwaymotors.com/Billet-Aluminum-License-Plate-Holder-w-Light,2217.html found it!