1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Looking for rotor/caliper torque specs

Discussion in '1st Gen. Tacomas (1995-2004)' started by buck351, May 5, 2007.

  1. May 5, 2007 at 7:30 AM
    #1
    buck351

    buck351 [OP] Member

    Joined:
    May 5, 2007
    Member:
    #1507
    Messages:
    11
    I need the torque specs for the rotor bolts and the caliper bolts on my 2002 tacoma S-Runner. I'm having a hard time finding this information. I have not found any aftermarket manuals for this model/year and the Toyota manual is a much as the entire brake job.

    I've developed a noise in the right front brake and with 48,000 miles it's time to do the brakes. I want to install new ATE performance slotted rotor and TRD pads. May have to replace the calipers depending on what I find.

    Any help is appreciated.
     
  2. May 5, 2007 at 2:40 PM
    #2
    twoarezee

    twoarezee Well-Known Member

    Joined:
    Sep 9, 2006
    Member:
    #20
    Messages:
    277
    esco, ca
    Vehicle:
    00 Dropped Mini
    rims,tires,3"/6" drop, 4x4 front end, 01 tails and corners, prerunner buckets,tenzo r steering wheel w/ momo hub, b&m shifterw/ jdm trd knob, alpine system, tint, 3 3/4" autometer tach, jardine cat back, k&n, debaged, hellwig rear sway bar, kyb monomax shocks, tundra v8 oil filter w/ mobil 1 in ever
  3. May 5, 2007 at 3:41 PM
    #3
    buck351

    buck351 [OP] Member

    Joined:
    May 5, 2007
    Member:
    #1507
    Messages:
    11
    Thanks this should be very helpful. I'll check it out.
     
  4. May 5, 2007 at 3:44 PM
    #4
    buck351

    buck351 [OP] Member

    Joined:
    May 5, 2007
    Member:
    #1507
    Messages:
    11
    I checked out the link and they don't have a listing for the 2002 Tacoma.
     
  5. May 5, 2007 at 8:28 PM
    #5
    twoarezee

    twoarezee Well-Known Member

    Joined:
    Sep 9, 2006
    Member:
    #20
    Messages:
    277
    esco, ca
    Vehicle:
    00 Dropped Mini
    rims,tires,3"/6" drop, 4x4 front end, 01 tails and corners, prerunner buckets,tenzo r steering wheel w/ momo hub, b&m shifterw/ jdm trd knob, alpine system, tint, 3 3/4" autometer tach, jardine cat back, k&n, debaged, hellwig rear sway bar, kyb monomax shocks, tundra v8 oil filter w/ mobil 1 in ever
    its the same as the 2000 and the 2003.
     
  6. May 27, 2007 at 10:23 AM
    #6
    paulcleston

    paulcleston Active Member

    Joined:
    Nov 18, 2006
    Member:
    #258
    Messages:
    34
    I have a 1999 Tacoma that has a rattle in the passenger side airbag. Do you know if this is something that I can go in and tighten up or is this something that I should not fool with. I am a retired service manager but from a Caterpillar Dealer. Our transmissions were half a large as this entire pickup and I have no first hand experience or training on the truck. Thanks. Paul
     
  7. May 27, 2007 at 11:13 AM
    #7
    twoarezee

    twoarezee Well-Known Member

    Joined:
    Sep 9, 2006
    Member:
    #20
    Messages:
    277
    esco, ca
    Vehicle:
    00 Dropped Mini
    rims,tires,3"/6" drop, 4x4 front end, 01 tails and corners, prerunner buckets,tenzo r steering wheel w/ momo hub, b&m shifterw/ jdm trd knob, alpine system, tint, 3 3/4" autometer tach, jardine cat back, k&n, debaged, hellwig rear sway bar, kyb monomax shocks, tundra v8 oil filter w/ mobil 1 in ever
    its probably the dash itself rattling.
     
To Top