1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lost UCA washer!

Discussion in 'Suspension' started by ZekeR7, Apr 17, 2020.

  1. Apr 17, 2020 at 9:03 PM
    #1
    ZekeR7

    ZekeR7 [OP] Well-Known Member

    Joined:
    Jan 19, 2018
    Member:
    #241779
    Messages:
    1,282
    Gender:
    Male
    Vehicle:
    2018 TRD Off-Road 4x4 Quicksand
    I done messed up and lost two washers for the JBA STD High Caster UCA (recently moved and must have thrown it away thinking it was extra parts). They are the thin ones that go on the inside.

    Does anyone know the inner and outer diameter of the fender washer that goes on the inside/outside?
    I know the thickness is 14ga, but I want to make sure I get the right inner and outer diameter.

    I had to install it without one inside washer on each side (pretty snug and no play actually), to move my truck out of the way since I didn't think it would take long and blocked my driveway. The stock had a small crack in it, which was why I was replacing it so I didn't want to put it back on. Just going to the Hardware store to get one.
     

Products Discussed in

To Top