1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

LR UCA grease upper bushings?

Discussion in 'Suspension' started by kuyatribes, Jan 7, 2012.

  1. Jan 7, 2012 at 11:39 AM

    kuyatribes [OP] Member

    Jan 2, 2012
    First Name:
    Mesa, Arizona
    2011 DCLB 4x4 Sport
    Snug Top, Weathertec floor mats and Side window deflectors, Michelin LTX AT2 stock size, leather seat covers, dash mat, TRD CAI, Banks Monster catback, yellow top battery,Ome leaf packs and struts and shocks with LR UCA, (Dwreck bolt on sliders, group buy on hood struts, benwa rear window slider kit, Leer 180 shell, Wheelers Bump stops, Ome extra leaf these items paid for but yet to be installed)
    Received LRs, is it necessary to install zert fittings for upper bushings?
    If so how to get the bushings out? And will I need new bushings?

    The boot on lower bearing is sealed has it been lubed? SPC tech help is off on sat.

    Will set caster at +2 and camber all the way out in slot.

    Install the lca first then the ball joint to arm?

    Have watched SPCs video.

    Will be cutting upper bolts and install new.

    Have watched video of truck on lift and LCA removed bolts at bottom of spindle LCA swung down to remove struts. Is this acceptable if can get truck high enough from garage floor and also remove UCA at same time with the swaybar removed?

    OME kit still not here.

    Have done a lot of research on this on TW. It is an amazing forum.

    Thank you for all the hard work found here and the many excellent answers.:)

Products Discussed in

To Top