1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Make door lock audible (2007 Tacoma)

Discussion in 'Technical Chat' started by nolanspawn, Oct 13, 2007.

  1. May 23, 2008 at 3:33 AM

    hans17 Well-Known Member

    Dec 16, 2007
    san juan puerto rico
    tacoma xtra cab v6 sport 2007
    3"ez-lift kit , 1" spacer , stock wheels 17" , 285/70-17
    How can I stop my head light from turning on everytime I activate or disactivate the alarm , and change them to the smaller lights?
  2. Nov 27, 2008 at 10:33 AM

    Johnson8537 Well-Known Member

    Oct 27, 2007
    06 TRD SPORT 4x4 Double Cab Long bed
    Revtek Leveling Kit with 1 1/2 block spacer in rear. 17" MotoMetal blacks on 32" tires. Access Lorado Tonneau - Bed mat Billet Grill Tinted Windows Pioneer 700BT with PAC steering wheel inerface. Wet Okole Seat Covers Front and back.
    I was curious if anyone had tested these wires out...? Maybe this is what you were talking about in the quote above. (if so any Alarm siren should work.)

    anyway the wire locations..

    (Under the kick panel Double Cab) (passenger side AccessCab) is a Blue/Pink wire the "Lock" wire. Blue/Black the "unlock" wire.

    Are these wires sending a 12V signal?

    If so then the beeper would ONLY beep when locking or unlocking?

    I would only need mine to beep as a "it's Locked reminder" so i would only need to wire it into the Blue/Pink wire.

    I know that it would beep everytime the Lock button was hit unless a 12V switched ungrounded the horn when the key was on.

    What are your thoughts on this?

Products Discussed in

To Top