1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Measurements after Leaf TSB

Discussion in 'Suspension' started by Devildoc, Feb 17, 2010.

  1. Feb 17, 2010 at 7:41 PM
    #1
    Devildoc

    Devildoc [OP] Well-Known Member

    Joined:
    Dec 26, 2009
    Member:
    #28170
    Messages:
    124
    Gender:
    Male
    Lincoln, California
    Vehicle:
    Speedway Blue off road
    Running board, K&N air filter, Nitto Terra Grapplers G2 on ProComp 7089(285/70/17), 3" front lift and 1.5" AAl rear, all with bilstein 5100's with Eibach spring, 1/2 spacer in driver side and 1/4 spacer on the passenger, Wicked Flow exhaust, Debadge, satoshi raptor grille (HomerTaco)
    Hey guys! Can someone send their measurements after the TSB was done. I know it lifted about 1 1/2 inch but, I want the measurements after it has settled already. I am having mine done and I will be lifting the front and I just want to have some idea on how to properly level my truck. I will be installing an adustable 5100's with an eibach spring. I don't know if I need to set it on .85 or 1.75 to level the truck. I don't mind a little rake in the front rather than having my front sticking up. I have a 4x4 DBL cab V6 2010 for comparison. Thanks!
     
To Top