MORIMOTO XB LED FOG LIGHTS GROUP BUY! **CLOSED**

****MORIMOTO XB LED FOG LIGHTS GROUP BUY ****

***GROUP BUY IS NOW CLOSED***

10+ MEMBERS NEEDED FOR GROUP BUY​

Current Member Purchase Count = 20+

20% + FREE Shipping to Continental United States

***UPDATE***
Orders will begin shipping after Easter Holiday. Group Buy will remain open until Sunday April 23rd @ Midnight.



​

INFO:


Hello Tacoma World! I have done several group buys for the Morimoto XB LED Fog Lights on Tundras.com. I think you guys should have this awesome deal as well! There will be a count meter at the top of the page that will stay updated as people make purchases. Please read all info before purchasing.


HOW TO PURCHASE:

Click the following links below to go directly to the purchase page on RetrofitWholesale.com. During checkout, use coupon code "tacoma20" Coupon is restricted to 1 item per order. So if you want to order more than 1, you must do separate transactions.

If you don't see an email confirmation after purchase, please check your Spam Folder.

END DATE:

TO GIVE PEOPLE PLENTY OF TIME TO PURCHASE, THIS GROUP BUY WILL LAST UNTIL SUNDAY @ MIDNIGHT 4/23/2017 Eastern Time. HAPPY EASTER!
Please note fog lights will not begin shipping until after group buy has closed. You will receive a shipment confirmation email once your order has shipped so please check your inbox/or spam folder.

PURCHASE LINKS:

XB FOGS TYPE T2 (2005-2011 Tacoma's) TOYOTA (ROUND): MORIMOTO XB LED FOG LIGHTS - Retrofit Wholesale


XB FOGS TYPE T (2012-2017 Tacoma's) TOYOTA (OVAL): MORIMOTO XB LED FOG LIGHTS - Retrofit Wholesale

RULES:
1. You must be a forum member.
2. During checkout, you must include your forum username (SEE EXAMPLE). Any orders without verified forum usernames will be canceled and refunded before or after group buy has closed

WARRANTY:

Fog lights comes with a 10 year warranty!
Please read Warranty Details: Warranty - Retrofit Wholesale

SPECS

• Light Source: 3x Philips Luxeon-T
• LED Optics: Kuria-2 Projector Fog Lens
• Intensity: 2400 Lumens (1200 per fog light)
• Kelvin Rating: 5500K (pure white)

• Input Socket: Sealed H11 Male
• Weather Rated: IP67 Waterproof
• Lens Material: High Impact Polycarb (UV-Resistant)
• Shell / Heat Sink: Powder Coated Cast Aluminum

PICTURES:














XB FOG LIGHT INSTALL GUIDE

XB FOGS ARE A DIRECT SWAP

Gen 2
1. You need to go through the wheel well liner. Once you remove it, you will have access to the fogs.
2. Disconnect the fog lights connector.

3. Theres 1 Plastic retainer that holds the fog light in place. Use a flat head screw driver to unlock it. Remove the fog light by pushing foward and out.

4. Get your new XB fogs. The fog lights are NOT L/R Oriented.

5. Check the connectors polar pattern. Its reversed compared to standard connectors. Insert the wires into the blank connector noting the proper orientation of the Positive and Negative wires. (Be careful as once you lock it in the connector, its extremely difficult to remove).

6. Slide the XB fogs in its place and use the plastic retainer to lock it in place.

7. Connect the Fog Lights to OEM connector.

Gen 3
1. You need to go through the wheel well liner. Once you remove it, you will have access to the fogs.

3. Disconnect the fog lights connector.

2. There are two slots and 1 screw that holds the stock in place. Remove the scew and slide the stock fog light.
3. Get your new XB fogs. The fog lights are L/R Oriented. Look on the back of the lights to locate the L/R letters to know which side. R= Passenger, L=Driver.

4. Check the connectors polar pattern. Its reversed compared to standard connectors. Insert the wires into the blank connector noting the proper orientaion of the Positive and Negative wires. (Be careful as once you lock it in the connector, its extremely difficult to remove).

5. Slide the XB fogs in its place and either use the new screw that came with the fogs or re-use the old. Its a tighter fit as the tabs on the XB are thicker. Tighten the screw down.

6. Connect the Fog Lights to OEM connector.

AIMING


Since everyone has different heights on their truck, I cant give you a specific way to aim them. Best way is before removing your old fogs, drive back 10-15ft from a wall or ground and use tape to mark where your lights are.

The XB fogs are projector base LED's so the light will be more focused. Start by aiming them to the stock levels. Drive around without headlights on (parking lights off) so you can see where the spread is.

Spread should be about 4-10 ft in front of your truck depending on your headlights.

For those with retrofits, you want the XB fogs to end right at the beginning for your main HID or LED projector beam spread.

For those with stock halogen reflectors (with or without hid or led upgrades in reflector housings), you want the beam to end towards the middle of the main headlights beam spread.

Raise and lower to get your optimum desired height.

Hope this helps guys

 

NOOO please don't do this to me...

 

I'm in.

 

Yes unfortunately more money to spend

 

For a friend.....

 

Please everyone don't forget to put your forum username when ordering!

 

I refuse

 

Im in!

 

Purchased. Thanks for the GB! I've been eyeing these suckers for 6+ months now. Would these pair well with the Philips H4 LED bulbs in the headlights?

 

Most definitely!

 

Current Member Purchase Count = 11

 

someone link a review of these in the 2011+ flavor..

Thanks

 

I believe a few people posted reviews from TRSAndrew's group buy in Decemeber.

 

i have these in my '12. they are much brighter than stock and blend perfectly with the stock headlights. the bottom headlight cutoff is where the fogs pick up and provide light, of similar brightness compared to the headlights, that fills the area in front of the truck and to the sides as well. big time. i feel like they are too bright to run in traffic so i usually use them for trails or when it's raining.

 

Heres a good write up from @Square https://www.tacomaworld.com/threads/xb-led-fog-lights-from-the-retrofit-source.334213/

 

I've got it stickied.. It's just money right....

 

Yes just money! Nothing too important!

 

Order #6205 , please send your username via PM

 

In.