1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need help with a stumbling, stalling issue

Discussion in 'Technical Chat' started by Kcrowno1, Feb 4, 2017.

  1. Feb 4, 2017 at 1:30 AM
    #1
    Kcrowno1

    Kcrowno1 [OP] New Member

    Joined:
    Feb 4, 2017
    Member:
    #209575
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2000 tacoma 3.4l automatic 4x4
    Need some insight into an intermittent stumbling, knocking, loss of power and stalling issue with my 00 3.4l automatic taco. There's no specific pattern. Happens when the engines warm or cold. Right after start up or anytime during driving. Very random but getting worse. Probably electrical since a simple engine shut off and restart solves the problem for 1 or 2 drives. No codes of course. Already replaced the TPS and cleaned the MAF. Thinking maybe replacing the cam pos sensor next but im not tring to just throw parts at it. Any suggestions or experience with this problem would be EXTREMELY appreciated!!!!
     

Products Discussed in

To Top