Building my 04 back to life

So I've been building my yota back to life for the past month posting pics I'm tearing into the front end this week

 

Do you have a specific question?

 

I'm going from 97 to a 04 cab the 04 single cab mounts are the same correct

 

Hey, man. I hate to be the bearer of bad news, but you're missing a headlight.

 

gotta give it to the guy who does this stuff outside That's a lot of work! I would also know what kind of guidance you are looking for. As far as the cab question goes there are probably some small differences. I'd measure mounting points and then compare. Should be identical though.

 

Front suspention removed and I need guidance on wheel speed sens and the abs I'm doing a full delete

 

I had to cut the lower controll arms off that was the hardest part of this whole build I think

 

Well front end first coat por 15 done and header on

 

Looks like mine but I'm doing a frame swap 5lug frame to 6lug frame

 

Mad respect on the enginuity, mad respect.

 

I don't know if they have caps to cover the front opening of the abs sensor but someone just cut a piece of metal and bolt it down while using silicon to seal it.

As for the wiring, if you're up to the task of depinning its going to be a journey but its doable. I would just zip tie the sensor plug up and unplug the abs ecu.

 

That's badass man its a lot of work I kept the 97 set up because its manual locking hubs w.o abs so I just have a single brake line to the back and split the front I'm waiting on front end parts shocks and ball joints steering rack and sway bar I'm buying SAS 3 link setup later this year for it

 

What's a good front shock setup

 

I have auto hubs W.O. abs for my 97

 

You guys have more patience than I do

 

So I got another project guys 2004 toyota tacoma with a new frame from toyota bet yall cant guess how much I got it for

 

$1450?

 

Tree fiddy

 

800