Neutral safety switch

New here got a question.have any of you guys had trouble with you neutral safety switch I got a code po705 can you clean them and where is it on the transmission.

 

Here is some info on diagnostic.
https://www.tacomaworld.com/threads/p0705-code-and-subsequent-cel-issues.687466/


Here is where it is and looks like
https://www.tacomaworld.com/threads/2005-tacoma-p0705-code.696026/#post-24616204

You can Thank @Jimmyh

 

Thank you. It is also hard to move threw the gears a guy told me you could clean them. I'm going to try that before I spend $269. For a new one

 

Crawl under and see how bad it is corroded.
It’s not uncommon to find it in bad shape.
And it can be really hard to get off to clean/replace.
If you take it off, make sure you get it back in the correct alignment.
https://www.tacomaworld.com/threads/neural-saftety-switch.704312/#post-25000164

Becare NOT to reef on the nut too hard.
You risk causing a leak if you do.
Read though this post for help.
https://www.tacomaworld.com/threads/new-prndl-switch-then-red-fluid-leak.703981/#post-24965041

This probably is NOT the problem. But it’s worth try if all else fails.
https://www.tacomaworld.com/threads/automatic-shifter-problem.103889/#post-3849647

 

Thanks guys. I just had back surgery so I have to wait till my son has time to help. I will let you know what I find out. Again thanks alot