NEW BATCH! Custom Bracket - Vertical Install ARB Twin Compressor

still have any available?

 

I do have a few left...

Just to be clear (because some people have misunderstood), This is NOT the entire compressor mount, it is just a custom bracket I made to replace the upper bracket in the Slee Offroad 2nd Gen. compressor mounting kit (http://www.sleeoffroad.com/products/products_air.htm #SOK001) to adapt it to work on the 3rd Gen. Tacoma.
You will need to have/get the Slee kit for this to work. Installation is per Slee instructions until you get to upper bracket and then just use mine instead of theirs.

If you're still interested you can paypal me the $28 (markj.pdx@gmail.com) and leave your shipping address in the notes, I will get one sent out to you.

 

got mine thank you!!!

 

What is the advantage of mounting it up front like this?

 

I don't know why but I'm really enjoying reading this thread...it gives me the lols

 

As opposed to mounting it where? Most compressors are mounted in the engine,this allows you to fit both a compressor and dual battery system.

 

Well, for me it was the cleanest solution I could come up with to have both a 2nd battery and a compressor under the hood of my truck.
Also, I wanted the battery in the space on the passenger side to help balance weight distribution and not overload left-front corner of the truck with dual batteries in stock location, exacerbating the taco lean.
I wanted the compressor up front because it draws a lot of power and I wanted to keep my wire runs to the battery as short and small gauge as possible. Mounting it elsewhere would have required a lot more of a lot bigger (expensive) wire to achieve.

That was my main rational for my situation, YMMV

 

This is exactly why I bought your bracket. Thanks again

 

Most of the installs ive seen were in the back of the engine bay or somewhere else altogether, I was just curious why if you had a reasoning for this particular placement. Thanks for answering my question.

 

He literally just answered this question. Also look at the first picture in this thread and you'll understand.

 

ok... one more question for all of you folks. after this is installed, how does the final product look like? such as where you guys put on the connectors, etc...

 

PM sent...interested in one

 

sent you a PM
if you still have any available @MJ_PDX

 

Definitely want to purchase, just tell me how much.

 

Any chance these may make a comeback?

 

Not likely, I've only had a couple people inquire after the first two batches have run out.
That being said, if we can get 10-12 people interested, I'd be happy to get another batch made up.

 

Count me in for one of these make a comeback

 

On a side note, do you have details on your dual battery set up?

 

That is a Off-Grid Engineering dual battery kit. Kinda pricey, but it is complete (batteries not included) and he uses very high quality components.
https://www.**************/collections/dual-battery-systems