Delete

7r41lbr34k3r · Feb 14, 2022

Discontinued.

tonered · Oct 4, 2018

7r41lbr34k3r[OP] initial post: ↑

(customer coated below)

Cost is $70 for one set of two. Shipping is $7.20 if I am able to use a single small flat rate box from USPS (which will fit two sets of 2).

Three sets of 2 are available right now, with four more sets in the works that are close to finished. Once those are spoken for, I will have to replenish materials.

I can also engrave TRD (or something custom as long as it isn't too crazy) on them for those who wanted something like that for an additional $15 fee.

These seat spacers were designed by @tonered, and I began making them in early July with his permission. Here is where it started. If you want to 3D print them for yourself, there are files in that thread that you can download. Be sure to print them with 100% fill if you take that route.

Hardware will not be included, because I am far too short on time to even leave my shop these days.

They are designed to match the contour of the plastic trim pieces on the back of the seats, and I added the counterbore for those who wanted to increase height in the future without having to buy another set at full price. Price is yet to be determined for that, as material will need to be ordered. Black Delrin/Acetal will also be an option at some point, once I get the material in.

I can go up to 1.25"/32mm of lift with current material. I can also go shorter, but there would be an upcharge for that as it would take longer to make them with current raw material.
Click to expand...

Awesome!

I am still happy that there are no complaints from the passenger seat since I installed them.

7r41lbr34k3r · Oct 4, 2018

tonered said: ↑

Awesome!

I am still happy that there are no complaints from the passenger seat since I installed them.
Click to expand...

All complaints have been transferred to me, because I am always late for dinner due to making them.

tonered · Oct 4, 2018

7r41lbr34k3r[OP] said: ↑

All complaints have been transferred to me, because I am always late for dinner due to making them.
Click to expand...

That's some crazy voodoo. Tell her that it was for a good cause. Because mods!

7r41lbr34k3r · Oct 29, 2018

Three sets (of 2) remaining.

slowlane · Oct 6, 2018

for anyone interested in any of the seat spacers being sold, these spacers are far susperior to any of the ones availible. yes, they all function and work the same way, but these spacers will give you a finished look. they look like part of the plastic cover. i guess you get what you pay for. thanks to @tonered and @7r41lbr34k3r

tonered · Oct 6, 2018

slowlane said: ↑

for anyone interested in any of the seat spacers being sold, these spacers are far susperior to any of the ones availible. yes, they all function and work the same way, but these spacers will give you a finished look. they look like part of the plastic cover. i guess you get what you pay for. thanks to @tonered and @7r41lbr34k3r
Click to expand...

Thanks, @slowlane ! @7r41lbr34k3r is machinist extraordinaire.

hirod · Oct 30, 2018

what size bolts should i be picking up?

7r41lbr34k3r · Oct 31, 2018

Here you go.

For installation, I have been telling folks to get the Grade 10.9 M10 x 50mm 1.25 pitch bolts at Ace (about $2.70 each) or at an autoparts store. Our local one has them in a three pack for $4.00. The bolts should be torqued to 37N-m (27.5ft-lb).
Click to expand...

RJS59 · Dec 4, 2018

7r41lbr34k3r[OP] initial post: ↑

(customer coated below)

Cost is $70 for one set of two. Shipping is $7.20 if I am able to use a single small flat rate box from USPS (which will fit two sets of 2).

Availability:

sold out
________________________________________

I can also engrave TRD (or something custom as long as it isn't too crazy) on them for those who wanted something like that for an additional $15 fee.

These seat spacers were designed by @tonered, and I began making them in early July with his permission. Here is where it started. If you want to 3D print them for yourself, there are files in that thread that you can download. Be sure to print them with 100% fill if you take that route.

Hardware will not be included, because I am far too short on time to even leave my shop these days.

They are designed to match the contour of the plastic trim pieces on the back of the seats, and I added the counterbore for those who wanted to increase height in the future without having to buy another set at full price. Price is yet to be determined for that, as material will need to be ordered.

I can go up to 1.25"/32mm of lift with current material. I can also go shorter, but there would be an upcharge for that as it would take longer to make them with current raw material.

As with anything, there are always additional risks in changing the original design of the vehicle. This mod has been very well thought out, IMO, but buyer is responsible for any risks incurred by changing the original design of their truck.

Be sure to check here for a more budget friendly option.
Click to expand...

Is it possible to order 2 sets.

7r41lbr34k3r · Dec 5, 2018

RJS59 said: ↑

Is it possible to order 2 sets.
Click to expand...

Yep, there is enough raw material in stock for about 10 sets of two. I have 6 more knobs to finish (which are about 75% complete already) so I wouldn't be able to start on spacers until after the 14th.

Sch0227 · Dec 15, 2018

Can I get on the list for a set when you've got some back in stock?

7r41lbr34k3r · Dec 16, 2018

Sch0227 said: ↑

Can I get on the list for a set when you've got some back in stock?
Click to expand...

Sure, PM incoming.

Wtsmith · Dec 16, 2018

I would like two sets as well when you have a chance.

7r41lbr34k3r · Dec 16, 2018

Wtsmith said: ↑

I would like two sets as well when you have a chance.
Click to expand...

Doing some finishing touches on a batch of knobs that I am shipping out tomorrow, and my mill will be freed up for spacers after today. Will PM you in a few with details.

batong_23 · Dec 17, 2018

7r41lbr34k3r[OP] said: ↑

Doing some finishing touches on a batch of knobs that I am shipping out tomorrow, and my mill will be freed up for spacers after today. Will PM you in a few with details.
Click to expand...

can you PM me too on some seat spacers? thanks.

Flatout110 · Dec 18, 2018

Are you still manufacturing and selling these spacers? Information please. Thank you!

7r41lbr34k3r · Dec 18, 2018

Flatout110 said: ↑

Are you still manufacturing and selling these spacers? Information please. Thank you!
Click to expand...

Yep, I just have nothing finished right now and would have to make them by "order". Lead time is about 2-3 weeks or so, as I have a bit of a backlog.

daltondrose · Dec 18, 2018

7r41lbr34k3r[OP] initial post: ↑

(customer coated below)

Cost is $70 for one set of two. Shipping is $7.20 if I am able to use a single small flat rate box from USPS (which will fit two sets of 2).

Availability:

sold out
________________________________________

I can also engrave TRD (or something custom as long as it isn't too crazy) on them for those who wanted something like that for an additional $15 fee.

These seat spacers were designed by @tonered, and I began making them in early July with his permission. Here is where it started. If you want to 3D print them for yourself, there are files in that thread that you can download. Be sure to print them with 100% fill if you take that route.

Hardware will not be included, because I am far too short on time to even leave my shop these days.

They are designed to match the contour of the plastic trim pieces on the back of the seats, and I added the counterbore for those who wanted to increase height in the future without having to buy another set at full price. Price is yet to be determined for that, as material will need to be ordered.

I can go up to 1.25"/32mm of lift with current material. I can also go shorter, but there would be an upcharge for that as it would take longer to make them with current raw material.

As with anything, there are always additional risks in changing the original design of the vehicle. This mod has been very well thought out, IMO, but buyer is responsible for any risks incurred by changing the original design of their truck.

Be sure to check here for a more budget friendly option.
Click to expand...

Taking orders?

7r41lbr34k3r · Dec 18, 2018

daltondrose said: ↑

Taking orders?
Click to expand...

Yep, I had somebody cut their order in half ... so I might have room for 1 more after you. I also have to check material status. Should have more than enough to cover a few more orders, but I will double check in a few.

Log in or Sign up

Welcome to Tacoma World!

Delete

#1
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#2
tonered bartheloni

#3
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#4
tonered bartheloni

#5
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#6
slowlane Well-Known Member

#7
tonered bartheloni

#8
hirod Well-Known Member

#9
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#10
RJS59 Well-Known Member

#11
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#12
Sch0227 Well-Known Member

#13
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#14
Wtsmith Well-Known Member

#15
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#16
batong_23 vincedprince

#17
Flatout110 Well-Known Member

#18
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#19
daltondrose Well-Known Member

#20
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Delete

#1 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#2 tonered bartheloni

#3 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#4 tonered bartheloni

#5 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#6 slowlane Well-Known Member

#7 tonered bartheloni

#8 hirod Well-Known Member

#9 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#10 RJS59 Well-Known Member

#11 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#12 Sch0227 Well-Known Member

#13 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#14 Wtsmith Well-Known Member

#15 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#16 batong_23 vincedprince

#17 Flatout110 Well-Known Member

#18 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#19 daltondrose Well-Known Member

#20 7r41lbr34k3r [OP] Practitioner of the mechanical arts.

Products Discussed in Entire Site Forum: 3rd Gen Tacoma Parts Marketplace (2016-2023)

#1
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#2
tonered bartheloni

#3
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#4
tonered bartheloni

#5
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#6
slowlane Well-Known Member

#7
tonered bartheloni

#8
hirod Well-Known Member

#9
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#10
RJS59 Well-Known Member

#11
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#12
Sch0227 Well-Known Member

#13
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#14
Wtsmith Well-Known Member

#15
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#16
batong_23 vincedprince

#17
Flatout110 Well-Known Member

#18
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

#19
daltondrose Well-Known Member

#20
7r41lbr34k3r [OP] Practitioner of the mechanical arts.

Products Discussed in