OEM Alarm Mod...not sure if this actually works

bumpidy

 

fwiw, i couldn't find anything for you...keep bumping this though...if it's available, a TW member will find it.

 

Thanks keith, I'd really like to get that LED in there for the factory alarm look, but only if it doesnt cost me too much. For now, I did the alarm upgrade, works like a champ!

 

Two things:

First, Is the Glass break module fully plug and play? I see it has two sets of wires and one plug. Does the plug account for all the wires?

Second, there are two used glass break sensors on ebay right now for around 24 bucks. FYI Only.

Flash

 

Old thread, I know, but I was going to do this on my 04 and had trouble finding the plug too and came across this thread. It appears as though they may have changed the location of the plug for the 04s, and maybe some other years as well.

I found mine basically behind the ash tray, taped to a harness under the radio; it is a 4-pin plug. I got a GBS/LED from an 07 Tundra (ebay for $20), so the plugs didn’t match, so I had to cut/solder the wires. On the truck, the wires are white/black and brown for the LED and white and black for the GBS. I connected everything, adjusted the GBS sensitivity on the module in the drivers kick panel and all is working perfectly.

Hope this helps someone.