1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

OEM TriFold Toneau and OEM Bed Divider-Interference

Discussion in 'Canada' started by 2012 TRD SPORT, Apr 23, 2012.

  1. Apr 23, 2012 at 11:23 AM
    #1
    2012 TRD SPORT

    2012 TRD SPORT [OP] Member

    Joined:
    Oct 18, 2011
    Member:
    #65436
    Messages:
    10
    Gender:
    Male
    PARIS, ONTARIO
    Vehicle:
    TRD SPORT WITH LEATHER,NAUTICAL BLUE METALLIC
    TRI-FOLD COVER, FRONT SKID PLATE, ALUMINUM OVAL STEP BARS, TRD EXHAUST
    Hey guys. I just put in a bed divider in my 12 Tacoma. I also have the OEM tri fold toneau cover. I find that the top tightening nuts on the divider are sitting up against the toneau cover and not allowing it to fully sit against the bed rail caps. Anyone else have this problem? Know where I can get some smaller (not so tall adjuster knobs for the top of the divider so there won't be any interference?
    Thanks.
     
  2. Apr 24, 2012 at 12:53 PM
    #2
    2012 TRD SPORT

    2012 TRD SPORT [OP] Member

    Joined:
    Oct 18, 2011
    Member:
    #65436
    Messages:
    10
    Gender:
    Male
    PARIS, ONTARIO
    Vehicle:
    TRD SPORT WITH LEATHER,NAUTICAL BLUE METALLIC
    TRI-FOLD COVER, FRONT SKID PLATE, ALUMINUM OVAL STEP BARS, TRD EXHAUST
    I found that if you mount the side braces upside down then you can 'drop' the divider into the brackets and this places the tightening knobs on the underside of the braces and eliminates any interference with the tri fold toneau cover.
     
To Top