1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

oil filter drain mod...

Discussion in '2nd Gen. Tacomas (2005-2015)' started by red06toy, Feb 19, 2009.

  1. Feb 19, 2009 at 7:14 PM

    red06toy [OP] Well-Known Member

    Aug 28, 2008
    Worcester MA
    Impulse red OR, 2.5 lift
    2.5 toytec, bilstein 5100 black grille, black lights, partially shaved decals remaning ones black, , trd fj wheels, sirius, Ipod interface, pre-filter delete
    So I had to do an oil change this weekend and figured it was time to do this mod. I had an extra 2' of snow blower fuel line so I put it to use. I pulled the rubber cap off the filter base, pressed the new line on and ran it down to a hole in the skid plate. I zip tied it to the radiator hose and to the skid plate. I will post pics tomm. In the mean time, if you guys are doing your own oil changes this makes life so much easier than taping a hanger to a gatorade bottle (my oil catching method before!)
    The line was 1/4" fuel line thick wall.

Products Discussed in

To Top