1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Park SW Wire on Kenwood Harness

Discussion in 'Audio & Video' started by rmd0311, Dec 30, 2010.

  1. rmd0311

    rmd0311 [OP] Well-Known Member

    Joined:
    Oct 30, 2007
    Member:
    #3302
    Messages:
    291
    Gender:
    Male
    Dutchess County, NY
    Vehicle:
    2010 Mag Gray TRD Sport
    Hi All,

    I am prepping my harness for install. The Kenwood side has a Park SW wire to control when and if you can watch DVD's and stuff. I read in many places that with the kenwood all that needs to be done is tap into the ground. Which is fine by me. Is this a correct way of doing it? What I did was grab the ground from the harness I bought to the ground from the kenwood harness and then throw in the Park SW (green) in and twist all three and then add butt connector. Or would the proper way be secure the two ground and then add another point in the cable add a quick splice.

    Thanks for the help.
    [​IMG]
     
  2. rmd0311

    rmd0311 [OP] Well-Known Member

    Joined:
    Oct 30, 2007
    Member:
    #3302
    Messages:
    291
    Gender:
    Male
    Dutchess County, NY
    Vehicle:
    2010 Mag Gray TRD Sport
    New years eve bump.
     
To Top