1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Postive Camber with Camburg??

Discussion in 'Suspension' started by Toolex, Mar 17, 2011.

  1. Mar 17, 2011 at 12:32 AM

    Toolex [OP] Member

    Jun 25, 2009
    Hi all, new to the forum. I have an 06 2wd taco w/ what I believe is the first generation Camburg uniball UCA with coilover shocks. I have my coilovers set to a slight lift, just enough to fit 285/75s R16 with slight rubbing. My problem is I cannot get 0 camber with the lift. Seems like I see tons of taco's driving around with stock UCAs and a higher lift with a better camber angle than mine. Truck has been aligned by a decent shop and i was told the UCA don't allow enough camber adjustment. Are the first gen. Camburg UCA junk or something?
    -Thanks for any input

Products Discussed in

To Top