1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Procomp 6" lift, Allpro 3" Leafs

Discussion in 'Suspension' started by areghas, Jun 7, 2012.

  1. Jun 7, 2012 at 9:44 AM
    #1
    areghas

    areghas [OP] Active Member

    Joined:
    Mar 15, 2012
    Member:
    #74941
    Messages:
    42
    Gender:
    Male
    Cannon AFB
    Vehicle:
    6in ProComp lift, 33" tires.
    I have an 08 taco DCSB with a 6" procomp lift. There is a three inch block between the stock leafs and the axle in the rear. looking at the allpro website, the 3" leaf they have provided 3 inches of lift. am I right in assuming that I can purchase their new leafs to replace my stock leafs and the block in the back and maintain the same level of lift?
     
  2. Jun 14, 2012 at 5:01 PM
    #2
    gdry06

    gdry06 Well-Known Member

    Joined:
    Sep 30, 2011
    Member:
    #64420
    Messages:
    295
    Gender:
    Male
    First Name:
    Gary B
    PNW
    Vehicle:
    06 TRD SPORT
    3Link'd with trailgear rock assault housing, 295x75x18 Nitto m/t shackle flip kit w/ omd spring refurbs, roof rack, toyota toolbox
    your stock leaf has a aal, so you would need to leave the block in. better off finding a use set on here or buy new. the allpro leafs wouldnt work if your looking to take out the block.
     
  3. Jun 14, 2012 at 5:06 PM
    #3
    PLC721

    PLC721 Well-Known Member

    Joined:
    Dec 27, 2009
    Member:
    #28268
    Messages:
    18,256
    Gender:
    Male
    First Name:
    Patrick
    Chandler, Az
    Vehicle:
    2015 Tundra Double Cab
    See Build in Sig
    You can run the all pro springs with a 6" lift. I did for some time and manwithoutaplan is!
     
  4. Jun 15, 2012 at 10:48 AM
    #4
    areghas

    areghas [OP] Active Member

    Joined:
    Mar 15, 2012
    Member:
    #74941
    Messages:
    42
    Gender:
    Male
    Cannon AFB
    Vehicle:
    6in ProComp lift, 33" tires.
    I was looking to take the block out, yeah. I went ahead and did it anyway and now the truck sits funny. Its too low in the back and the all pro leafs are sitting almost flat. I'm about 2-3 inches from sitting on the bump stop in the back. Do I need to get three inch blocks again and longer u bolts to fix this?
     
To Top