Questions: BHLM... Floorjack & Jerry Can mounts

Hey guys so i had no idea where to put this because its just a few questions i have about various things i want to do and add to my truck

first question: For the 2012+ BHLM, what sealant are you using? I've looked and there are mixed reviews of mixed products, and the 2005-2011 seem to use different sealants than the 2012+. So what sealant works the best? and where can it be found?

Second & Third question: I recently went to harbor freight during their sale and picked up a floor jack and two 5gallon jerry cans.

Floor Jack: Jerry Cans: What are y'all doing to mount this in the bed of your truck? for the floor jack it only seems to be this wheel replacement/mount… what mounts are you using for the floor jack? or did you create one? and if you created it, do you have a write up?

And for the cans, i have a cover on my bed, so they have to lay on their side instead of upright

 

Here's how I mounted my gas gans, and I have a tonneau cover also.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/143973-bjmoose-mounts-nato-jerry-gas-cans.html

I'd be very reluctant to keep gas cans on their side in any orientation that the gas cap was below the "waterline level" of the gasoline.

 

so I'm guessing yours fits under the cover and upright then?

 

yep. just touches the top of the cover.

 

Aweosme I'll be doing that then

 

Hey man so I ran into a speed bump with your design I thought I'd get your input.

I have to mount the cans on their side (called manufacture and told me only fill 80% for safety)

I was wondering if you have any ideas of how to stop the cans moving vertically. I can wrap the strap around to hold it to the back of the bed, but can't think of vertical movement

 

put one strap over the top.

 

So I also got a steal on these jerry cans from HF I went to their tow section and bought some d rings and mounted them on the side panels of my bed towards the tail gate for easy access due to my campershell.

Four d rings for each side to side then over the top. I got some 12-14in bungee cords to strap them down and perfect tool it wheeling and they were great no moving no rattling.