Raise the low slumping seat

Saw something about disconnecting the air bag sensors, does this affect the air bag in any way?

 

No

 

I just now installed mine and seems to be lot better but I will have to see after I get off work and drive home and run around all weekend but seems to make it better from just sitting in it. Ill update Sunday. I went ahead and ordered the other two for passenger seat today.

 

I installed the 1" for my passenger seat since I added a thick cushion for my driver side already. Works well. Only downside is that I have a Weather Tech mat in the rear and it pushes the mat up... But since I'm only an access cab and carry no passengers it's not that big of a deal.

 

Will these spacers work on the gen 3 Tacoma??

 

I don’t see why they wouldn’t. I assume the seats bolt to the floor in the same fashion.

 

One of my first "Mods' on my '09 DCSB, i fabbed 32 mm spacers for the rear seat mounts--read more here and here ...

 

That was exactly what i was looking for, thank you!

 

Bump! Just wanted to see if anyone has added or figured out how to raise the front too? I realize the bolts are on an angle but if I lift the back by an inch and a half it seems like the seat would be tilted....anyone have any luck?

 

I just put the spacers in the back and it has been great. Didn't add any spacers to the front I did loosen the front bolts when i did the rears so the seat would move freely then tightened everything back up when spacers were installed. It has been like that almost a year now and i have had no issues

 

I made spacers for the rear out of a hard plastic cutting board and Grade 10.9 M10-1.25x50 bolts. Had to fight with one of the bolts to get it line up correctly. The board was 3/8" thick so I cut three pieces 2"x2" square for each post then dog-eared two corners to match the seat post. Just used a hacksaw and a file to shape the spacers. Lifted seat 1 1/8" for just under $14. Taking a short trip tomorrow to see how it feels.

Update 10/26: Drove from northwest Washington to San Diego and back (2600 miles total) 3 days each way with butt in seat 7-8 hours each day. No back problems. Before this mod I made a 7 hour drive and could barely stand afterwards. Best $14 I ever spent.

 

I just installed these and they are perfect.

https://www.tacomaworld.com/threads...s-lifts-the-front-of-the-seat-3rd-gen.607482/

 

I need to do this, asap!