Remote and key in one single unit FCC BAB237131-056

In my ebay listing...I put all model years 2000+ to make sure people with only rs3200 bought it. Might work with older, not sure...dont want to play with peoples money and time.

 

Programming for my remotes only...*UPDATE*

1. Begin with the key out of the ignition.
** Make sure all doors and trunk are closed(NOT LOCKED)**
2. OPEN the DRIVER'S door.
3. Within 5 seconds INSERT the key into the ignition and PULL it out TWICE.
4. CLOSE then OPEN the DRIVER's side door TWICE.
5. Insert key INTO the ignition then REMOVE it.
6. CLOSE then OPEN the DRIVER's side door TWICE.
7. Insert the key INTO the ignition and LEAVE it in ignition.
8. CLOSE the DRIVER's side door.
9. Switch the ignition to ON then OFF.
10. REMOVE the key from ignition.
11. The door locks will now cycle to confirm the vehicle has successfully entered programming mode.

**If the door locks did not cycle you did procedure wrong. Go back to step one.**

12. PUSH and HOLD the LOCK and UNLOCK button for 1.5 seconds on the remote being
programmed. As soon as you let go PUSH the UNLOCK button and HOLD it for 2 seconds and release.
13. Wait about two seconds and the door locks will cycle ONCE to confirm successful programming of the remote. If you have any
additional remotes to program repeat step 12 if you have no additional remotes proceed to step 14.
**If door locks cycle TWICE, Go back to step 12.**
14. OPEN the DRIVER'S side door. Programming is now complete.

 

Oh ya, I am not trying to pass the buck at all here. 100% my fault. Still a great product, I'm very bummed I can't be in the club.

 

I'm going to PM you for a sidebar. Thanks

 

Received my key yesterday. Programmed it just now in less than a minute using the images I linked above. Now it's time to get the key cut.

 

Got my key today. Works perfectly!

 

I got a little grief from the locksmith here in Oakland I went to today when I got the key cut. At first he gave me no issues, but after we walked out to the truck to test the key he said "How much did you pay for this key? I could be a jerk and said that this would cost you $40 to cut because I would have had to replace it if it didn't work..."

Then said $5 so I handed him cash and left. He was probably upset because I believe they may sell keyless remote replacements, but I didn't see any all-in-ones like this. Next time I'll just go out of my way to the regular hardware store where they won't give me grief.

 

What locksmith? I will stay away too.

 

Jasonlee lives about 15 minutes from my shop. Was offered a free key with cut and programming. Didn't jump on it! Lol!

 

Keyosk on Broadway & 40th. Ace hardware on Grand Ave is my usual place that always has given me great service. I can only imagine what Toyota of Oakland (one block away) would have done for me ...

I couldn't make it soon enough with my work schedule

 

all cut and working earlier today.

 

I removed key from ebay. Fees are killing me.

http://www.ovnisf.com/

 

Ordered what I hope is the right one (now selling for $39.95)...

 

Correct one, passing eBay fee savings onto customers. Selling horribly so I will not have manufacturer make it anymore. Once sold out, that's it. The Fob itself is selling great.

 

I checked ur eBay store and couldn't find anything all in one for the rs3000 system. So is it impossible to clone the rs3000 stuff into one day f your all in one key/ FOB ?

 

Go to the link a few posts up, the all in one is still available for now. I plan on buying one just for the novelty of it.

 

More rs3200 systems out there and no market for the all in one key. No way Im going to waste more time building something that only a handful of people will buy. Not worth the time and investment.

 

I ordered the all in one, anxious to get it.

 

OP, try making a thread in the first gen marketplace, might help ya sell more there than in general discussion.

 

Actually that is a good idea, but this section gets a ton of traffic