Removing factory radio in 06?

I have to get my factory radio out in order to plug an iPod interface adapter into the harness. So, how do I get the stock unit out?

 

u have to take the air conditions it pops out and then the radio u will see four screws to un screw and then bam you got it out

 

http://www.youtube.com/watch?v=cV8Z5pCZGjU

 

http://www.tacomaworld.com/forum/audio-video/571-stereo-upgrade-basic-how-2nd-gen.html

Take the 4 bolts out and pull out on the unit then install your kit.

 

When you pull the radio be careful to not let it hang down and scrape on the dash panels underneath as you disconnect the elec plugs in the back. The dash panels are VERY easily scratched. I got a few on mine when I pulled the stock radio the first time.

 

Alright thanks alot guys for your help. I post back here if I have any problems

 

What disc number will i use on my 6 disc cd player? should it just work on disc one?

 

Mine is CD & CD1. Different CD sources not different discs. At least that's how it is on the single CD player. Isn't there CD as source & disc up/down seperate buttons on the 6 disc player? If so, you just hit the CD button twice to alternate from CD to CD1 on the display. CD1 should be the ipod or mp3 player.

 

numbers 3 and 4 switch disc up/down on the radio controls. So by pressing the disc button twice I'll be able to switch into ipod mode haha?

 

Here's a writeup with pictures

http://aaronlinsdau.com/gear/articles/ipod2car.html

 

Yeah, should switch between CD & CD1 on the display.

 

Alright thank you.