1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Right spreakers for my DC??

Discussion in 'Audio & Video' started by wolfdog3820, Oct 21, 2012.

  1. Oct 21, 2012 at 8:46 AM

    wolfdog3820 [OP] Member

    Feb 20, 2011
    west virginia
    Tacoma '10 SR5
    none yet....
    Hi yall,

    I have a 2010 Double cab and am wanting to upgrade the speakers to make it louder.... am not wanting to use an amp. Does anyone have any suggestions on the right speakers to get? I just want to use them with my factory hu but want them louder......

    Thanks! JR:confused:
  2. Oct 21, 2012 at 11:07 AM

    Warhorseforever Will The Thrill

    May 3, 2011
    First Name:
    Sand Lapper
    2001 Toyota Tacoma Pre-Runner SR5
    Kenwood KDC-348U HU Kicker DS65 Front Doors Only 2 Polk Audio MM840 Kenwood KAC 8105D for subs SuperCrewSound.com behind rear seat sub box
    If you aren't going to be using an amp you need to look for speakers that have a high sensitivity. Speakers that have a high sensitivity means that they can get louder with what power you give to them. It's measured using 1 watt of power something like 90db up would work great. I'm assuming you don't want to fuss with mounting tweeters? If so then get a 2-way, or coaxial, speakers which means that the mid-woofer and tweet's are mounted on the same plane and assembly. Your best bet is to go to a shop is listen to a few but make sure that the head unit's powering them are in fact powering them and that the EQ's are zeroed out so that they all, supposedly, sound the same.

    I'm a big fan of Polk Audio for great sound with low budget. http://www.crutchfield.com/p_107DXI650S/Polk-Audio-DXi-650s.html?tp=95

    You should have 6x9's stock so you'll either need to make or buy an adapter ring to fit 6.5's. If you buy them from crutchfield they will send you one for free. They will also give you speaker terminal adapters so that you don't have to cut and splice your factory wiring just plug in and go.
To Top