Seat Track measurements

If anyone with a 2nd gen double cab or access cab would do me a favor and measure how long each track is on the driver's side seat and how far are they apart.

I'm trying to install bucket seats in my reg cab and I need to know if there is a difference. Thank you a million times in advance if you can do it for me.

 

Looks like (rough measurements)

Front Bolts- 15 1/4 inches from inside to inside edge of the hex heads
Track- 14 1/2 inches from inside edge to inside edge of the track frame
Length- (real rough cause I didn't take the fairings off the back end) about 18 1/2 to 19 inches.

I hope those were the numbers you were looking for!!

 

I also need them from a double cab if anyone can manage the time