Setting 6112

Yesterday I cleared all my suspension parts and painted my dakars. It really works in keeping rust away. Anyways I have the EL095R Dakars and I have 2nd Gen 6112 and wondering who can suggest what setting I should use.

Also got my RCI sliders ready to prime/paint.

 

You posted in the third gen section. But to level it... third perch

 

Yes my truck is a 2017 but my 6112 I’ve had for a while are for 2nd Gen. So 3rd perch should work well with Dakar in the rear?

 

You didn’t include that so it was an educated guess.

Your front end in one inch lower than the rear, that’s factory rake.

Look up your model of Dakar’s and see what they claim your lift will be.

Then look up the perch measurements of 6112s from 2nd gen on a third gen truck, and pick the perch that is roughly one inch more or slightly less than the rear lift claim. That’ll get you the closest to level.

Remember it won’t be perfect right away, you have to let it settle. But if they are still off in a couple of months, then bring it back and go up/down a perch to correct any miscalculations. Easy peasy

 

I have an inch block in the rear and have the 6112s(2nd Gen) on the third notch and its pretty level - truck is a 2016 DCSB