(SOLD) Fully wired and ready to plug in Pioneer DMH-WT7600NEX setup! ($1350/BO)

Radio and parts are pulled from my 2018 Tacoma. Here’s the list of everything and it all came from Crutchfield (except a small included USB-C to USB-A connector).

American International TOYK9714 Dash Kit (Black)
Crutchfield RCA Adapter
Metra 40-LX11 Antenna Adapter
Metra AX-TOYUSB USB Port Cable
Pioneer DMH-WT7600NEX
SiriusXM SXV300V1 Tuner
iDatalink Maestro RR Interface Module
iDatalink HRN-RR-TO2 Factory Integration Adapter
iDatalink ACC-SAT-TO2

This is the exact unit / wires / etc in my POST here - so you can see exactly how it was installed and when it was installed:
https://www.tacomaworld.com/threads/pioneer-dmh-wt7600nex-flush-mount-install.736256/

Why am I selling? I bought the Taco after my Tundra and thought I could do with a smaller truck... I was very VERY wrong. A dealership is giving me what I paid for the Taco in trade - so - the radio is out and the Taco is being re-homed - simple. Due to the truck size issue - the truck (as in this radio) has had about 1200 total road miles on it - it's barely used and you can see I haven't even pulled one of the stickers off the front face!)

I think I have all the original paperwork and I’m packing it all in original boxes and stuff BUT leaving the whole harness completely plugged in to the radio and ready to go.

Install is about as simple as it can be.

You will need to run one ground to the frame to one wire in the harness (grey / black stripe) AND you will need to thread the microphone up to the headliner and plug that into the radio - everything else is just unplug old and plug into new. All connections I made on the harness are soldered and shrink tubed.

NOTES

• the TOYO9714 Dash Kit only now consists of the 2 modified plastic brackets per my forum post above - the rest you don't use - so that got thrown away long ago.
• the Maestro RR is programmed to how I wanted it - the small USB cable you use to program it yourself is included so you can plug into your own computer and change buttons on the steering wheel

Attached are 4 pictured of the radio out of the truck with all the parts. I'm super happy to take any otehr specific picture you might want or answer any questions that are not in the linked post I made up above.

I'd like $1350 for the whole setup : all parts, I'll eat the shipping and I'll eat the PayPal fees. Or - make an offer I can't refuse!

 

Is there an option on that HU to turn just the screen / display off while leaving it powered on?

 

Not a clue as it's uninstalled now I can't answer that for you either. But - I'll bet you could ask the fine folks over at Crutchfield via a chat and they might be able to tell you.
TBH tho - I don't know why you would want to turn the screen off - that's kinda the draw of this unit - the massive HD screen.

If you are asking because you are worried about it being too bright at night - I can tell you the night mode never made it too bright whereas an old Sony CarPlay unit I had in my Tundra was too bright at night.

 

yeah that's exactly it - I drive at night a lot so I turn off the OEM display if I don't need Google Maps. I'll try the Crutchfield folks.

 

PENDING SALE

 

SOLD!