1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Switch help...

Discussion in 'Technical Chat' started by Bryan07sport, Mar 1, 2010.

  1. Mar 1, 2010 at 2:36 PM
    #1
    Bryan07sport

    Bryan07sport [OP] Well-Known Member

    Joined:
    Sep 26, 2009
    Member:
    #23363
    Messages:
    360
    Gender:
    Male
    First Name:
    Bryan
    Newark, Delaware
    Vehicle:
    07 TRD Sport Access 6spd
    Hardwire GPS, 110v power outlet in cab, foglights anytime, mudflaps removed, pa-15 ipod interface, rear leaf tsb, URD short shift, integrated third brake/cargo light, ABS disable switch, BHLM, Dynomax super turbo muffler, Nitto Terra Grapplers 265/70/17, Front Bilstein 5100's at 1.75, Weathertech floormats, sockmonkey bedsides, bestop supertop, spidertrax
    Hey all. I did the disable ABS mod where you tie a switch into the blue brake switch wire. This just allows you to turn the switch off so the abs doesn't get the signal to start doing stuff. Works great, however i just have it tied into a cheap temporary switch right now thats propped in one of my punchouts.... My problem is with what kind of switch i want to get to do this... I already have one of the toggle switches with the yellow led's for my integrated cargo/third brake light, but didn't think it would look right with that kind of switch for this. I was thinking more along the lines of the rear diff lock switch or clutch cancel, etc. Basically all i need is a switch that is normally on, but when you push it, it disconnects. This is because as soon as you disrupt the circuit, the abs is disabled until you turn the car off and back on, so a simple push button switch would work, but like i said, one that is normally on and when you switch it, turns off. Any ideas? suggestions? or should i just stick with a toggle?
     
To Top