Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

Nope

 

No package

 

I know we are all excited guys but we've waited for a month or more..let's not rush this now. If you wanna screw around I installed techstream version 12 on my windows 10 64 bit laptop and confirmed it's working with the tactrix adapter. Gotta figure out how to use it now.

 

No rush, but I was told he'd be sending it out this morning, so I kept the wife's work computer in the shop, but had to give it back this afternoon.

All good, do it when I can!

 

Tell her to kick rocks. ECU tune is more important.

 

Hell, I'll let you tell her that!

 

Driving around with 1.01B & spec u. "S" mode & ECT at Power

https://youtu.be/gnOb-vQRUds

See Original Post here

 

I received a tracking number on the 23rd. All it says is label created. Keep checking like a drug addict for updates. I'm pretty pumped up to get this done after reading all the positive experiences. Order number #1961

 

I was #1960 and received mine last Thursday. I think some folks reported not receiving tracking or tracking updates, but their hardware arrived just as well.

 

Well no hardware yet. I emailed @OVTune, and I know he's super busy. Just waiting for a response, or better yet the hardware to show up.

 

Patience... You ordered, it'll get there when it gets there.

 

He's not wrong to double check. With such a high volume, things will fall through the cracks. And for $765, people will talk about it. =)

 

That is what happened to me.

 

Patience indeed. I've probably refreshed my email 100 times this weekend hoping to have some non-rush-hour time to enjoy the tune over the weekend, but I also know that there is quite a bit of work to "certify" the 1.02 release given all of the incremental changes expected that I'm sure has taken a ton of time in testing and fine tuning over the last few days - compounded with the fact that dozens of these arrived in the last few days, exponentially increasing the customer base. Until then, we're all kids on Christmas eve eagerly awaiting the ECU Santa

 

I should be able to get to all the files in my inbox today. I will also be going through all orders and preparing the next shipment batch as well.
I understand some people may have not got the tracking email, or has not been shipped yet. Thank you for being patient. Normally when we fulfill an order with tracking our site processor auto sends out an email. I do not know why it did not do it this time. It may have been because of such a high volume being done at one time.

I was unable to get to them yesterday, I had some more tuning to do to finalize up a few things for the Edelbrock SC on the MX5.

I really appreciate everyone being patient, thank you. Also there has been some discussion with a company we work with for a really neat power adding mod for these trucks . Can't promise anything yet. We'll see what happens.

 

Thanks for the update! Is 1.02 ready for primetime or will those pending files be 1.01b?

 

Do what you can to persuade them!!

 

Almost. I want to finalize a few things first.
Again I thank everyone for being patient. We are a little behind on when we thought we would have 1.02 released. I just want to explain to everyone that doing all of this development and testing can take time. These vehicles ECUs are also one of the most complex we've done.

we will see what happens

 

Can't wait to get my tune back!