1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

The Cut On Fabtech

Discussion in '2nd Gen. Tacomas (2005-2015)' started by ellsworth, Jun 18, 2008.

  1. Jun 18, 2008 at 4:41 AM

    ellsworth [OP] Well-Known Member

    Aug 15, 2007
    08' off rd 6 speed
    6 inch Fabtech, st stabilizers, 18x9 DC -1s 305/65/18 bfg at's
    any input on the crossmember cut for the 6 inch fabtech . How close will the front prop shaft be to the weld in plate. I have an '08 and that crossmember looks beefy and the front pinion mount flange looks like it would be very tight near the cut piece. This is my daily driver. Want to go bigger but hesitant on cutting a piece out to find clearance issues after the piece is removed. Anyone with pics of this done or opinions of the kit. Please any input would be appreciated.

Products Discussed in

To Top