Thoughts on 37s

I have no a-pillar holes

 

Yeah I'm not gonna drill into it.

 

Never saw one yet and I've had my liners out for quite a while now. I'm willing to risk a few out dents at the cost of my truck rusting out. Besides I usually mash the outside dents back in on the trail anyway

 

Hahaha nice pic! Those bastard trees

 

sum bishes come outta nowhere

 

That is cool, I lije how it pops up and the headlights are built in it. You guys a a little on the crazy side jumping these trucks

 

My favorite post on this entire site. Cracks me up everytime.

 

Did my can mount chop the his weekend, I didn't really need it with my 255/85s but in preparation for 36s I got it knocked out. Looking at my wheels I don't this 4.25 BS will work so I have to add a new set of wheels to the shopping list. Gonna start buying 1 at a time till its done. Gonna be a long expensive road to 36s

 

Going to be badass tho. Keep us updated.

 

What are most of y'all running on wheel specs? Specifically Backspacing. I'm looking at new wheels and want to be able to run decent sized 35's maybe 37's in the distant future without having to get another set of wheels.

 

Nitto Trail Grapplers 35x12.5 R17 & Kmc Xd Strike wheels. 17x9 4.06 backspacing, -24mm offset

 

So after many pages of this thread I got fed up and slipped to the end. First off where do I find said surplus 37's and what trimming will be needed with 7" lift in the front 6" in the rear and a 3" body lift most likely running fiberglass?

 

EBay is a good place for the tires. I doubt anyone can answer the trimming question. To my knowledge the most lift anyone in this thread is running in 3" suspension with 1" body

 

Lots of lift will help but 37's when flexing are big for the wheel wells.
v have 6-7" lift and cmc/pinchweld/bfh to the firewall and can still rub like a hell when not at the mall.

 

Trail Worthy Fab is where I get mine. http://www.trailworthyfab.com/Tires

Like the last post shows, you still have to trim to get full stuff. (Nice truck BlackTaco!)

 

Know of any wheel company's that do custom bolt pattern drilling for a 16.5" wheel?

 

Trail Worthy Fab re-purposes the double beadlock Humvee wheels too. You can pick your bolt pattern and back spacing, among other things. I hear they're real heavy, but also beefy as hell

 

Did you get your wheels from there too? The H1 wheels look like 8 bolt pattern. Might join the 37s club here soon..

 

Look at this page on their website. That's what you need. Pro Comp also makes some cheap 16.5" steelies in our bolt pattern if you don't want to go with the custom double beadlocks, but I think backspacing options are limited so you may also need spacers. The Trail Worthy Fab ones can be made as low as 2.5" backspacing although someone here once recommended them in a 3.5" BS for our trucks.

 

I will just keep my 17s for when I go LT, no spacers required. I just would like to know my options.