TORSPD: NEVR

Bad news boys. After many phone calls it has come to my attention from my dealer, who talked to his US kelford rep, who talked to the NZ rep, that any cam produced for the 1grfe has got to go through subzero. They are in some contract that only allows thems to sell the cams for the 1grfe.

 

Thats how it was years ago as well. Seems that contract is still good. This is why I hate the UAE....

However, they are still purchasable. Just needs to be through them. Thank you for doing that leg work FreidTaco.

The good news though, is that the springs and retainers can be purchased locally.

So who is next to buy a set?

My self and one other have theirs. Mine will be going back on, hopefull by the middle of next month.

 

Well seeing as i was approved for a home building loan today, probably not me....... this week.

 

Roll it in.

 

A little eye candy.

WPC treated rotating assembly.

 

...too pretty to put together and hide inside a block, you should buy another set just to display...

 

For posterity and nostalgia of course.

 

Squeeze another egg out of that golden goose in your backyard.

 

This might sadden a few, but due to timing, I am picking up the truck tomorrow. With its modified but unfinished tune. They cleared up idle and cruising, so it will be smooth to drive. No sense in finishing the tune for Goldylocks when the stroker will be finished shortly after. No need for that extra expense right now. Sad as it may be.

 

You mean my Gnome forge? They have a philosopher's stone.

 

Changed the fuel filter. That was easy.

 

Can you recommend a fuel filter dock instead of the in one side out the other filter that URD provided? I'd like something that I can just unscrew a filter from and pop a new one in down the road.

 

Put an Aeromotive 5/16" OEM adapter onto the rubber line supplied with the URD kit. That will remove the hose clamp aspect and make that NAPA filter all plug n play.

 

http://www.jegs.com/i/Aeromotive/027/15117/10002/-1

That plus this

http://www.jegs.com/webapp/wcs/stor...uctId=92904&storeId=10001&sType=&pgGrp=search

As long as the URD supplied hose is 3/8". The hose which is attached to the external filter.

 

Unless you are looking to do a fuel filter upgrade similar to mine and want an every fuel compatible 5 micron filtration filter.......then that is a different story.....

 

Bottoms up f*ckers! Captain Morgan Private Stock and Mexican Coke. Not that high fructose infused bullshit Coke.

 

I like it!

 

100 proof is good as well! I'm halfway temped to try that cannon ball just to see if its got any flavor to it

 

No pussies on this thread. DO IT!!!

 

ROFL. I moved up to whiskey, got a good Jameson 12 year I'm sipping on