1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Toytec Lift???

Discussion in 'Suspension' started by SMITTY1, Feb 24, 2012.

  1. Feb 24, 2012 at 6:49 PM
    #1
    SMITTY1

    SMITTY1 [OP] Active Member

    Joined:
    Oct 24, 2011
    Member:
    #65745
    Messages:
    26
    Gender:
    Male
    First Name:
    Jonathon
    BAMA
    Vehicle:
    2010 Tacoma SR5 TRD 4WD
    I am going to install my lift @ my shop and I have seen two diffrent ways to seperate the UCA's and LCA's to remove the shock and coil assembly. Which way is the easiest to do? As far as cost or possible damage to ball joint boots etc...I have seen 17mm bolts that are located on the bottom of the lower control arm that thread into the bottom of the hub.
    And removing the castle nut on the top UCA to seperate for added room for removal. I am going with the adjustable coil over 3" lift Toytec has with 5100's with eibach springs. Any help would be a big help.
     
  2. Feb 25, 2012 at 12:19 PM
    #2
    USMCTacoma

    USMCTacoma New Member

    Joined:
    Jan 16, 2012
    Member:
    #70755
    Messages:
    4
    Gender:
    Male
    29 palms Ca
    Vehicle:
    03 Tacoma
    intake, exhause.. more to come
    What year is your truck? I did my 03 last weekend with the same lift...
     
To Top