Toytec lift

hey guys so I’m going to purchase the front coilovers second hand and wanted to know what else I’ll need to complete my kit when I install. I’m getting a good deal which is why I’m okay with searching for the other parts. For the 3” lift can I just run blocks in the rear or should I get longer bilsteins to match the front?

 

What are you going to be using the truck for?

 

The Baja 1000. Jk just some light desert and mountain use. I go camping and take my bike out every year so I just want a lift that’ll go through the desert and have some more clearance and ride just as nice if not better than stock

 

Look at adding the following to your list:
http://toyteclifts.3dcartstores.com/Toytec-Progressive-3-Leaf-Add-A-Leaf-Pack_p_976.html
http://toyteclifts.3dcartstores.com/Solid-Steel-Axle-Degree-Shims_p_358.html
http://toyteclifts.3dcartstores.com/Driveshaft-Carrier-Bearing-Drop-Kit-05-UP-Tacoma_p_168.html
http://toyteclifts.3dcartstores.com/UB-U-Bolts-with-hardware_p_9.html
http://toyteclifts.3dcartstores.com/Toytec-BOSS-Rear-Shocks-for-05Tacoma00-06-Tundra_p_137.html
http://toyteclifts.3dcartstores.com/25470--SPC-Upper-Control-Arms-for-05-UP-Tacoma_p_195.html
http://toyteclifts.3dcartstores.com...Steel-Brake-Lines-for-05-UP-Tacoma_p_296.html

I would also recommend some super bumpstops from @Wheeler's Off-Road Inc. I mostly stopped buying from Toytec because of the service I get from wheelers and Marie at Headstrong Offroad. You might want to contact Marie @HeadStrong Off-Road to see what she can get you for all the parts I listed above from Toytec. Headstrong is also in SoCal so shipping would be cheap.

Also @TOYTEC / @Wheeler's Off-Road Inc / @HeadStrong Off-Road are all vendors on the forum and very active. Tell any of the three what you have and what you are looking to do and your budget and they will help you out. Shoot them a PM.