TPWS Light wont turn off

My light came on over the weekend so I checked the tire pressures on all of my tires including the spare now the light will not reset any ideas ?

 

Try hitting all the tires with a bit of air..
Dead battery in one or more of the sensors. Figure a '10 could've been sold in '09, it's been 9 years on the same batteries...

 

I recommend doing the following- https://www.tacomaworld.com/threads/2012-tpms-light-disabled.284690/

 

Just take some black vinyl tape and put it over the light

 

I think I am going to try the cutting of the blue wire and attaching to the red/white wire seem a lot easier than taking the cluster out.

 

If the light flashes first and goes solid it's a sensor or battery issue

if the light just turns on with no flashing then it's a pressure issue

 

Yes it does flash then stays lit don't know which one is bad so I will just disable the light altogether.

 

Same thing has been happening in my 2010. Pretty sure the cause is dead TPMS batteries. I just ignore the light.

 

I had the same issue, America's Tire confirmed one of the sensors went bad.