Traction Control Problems

Alright ever since I put on my lift, which is Eibach Coils with Billies set at .85 and an AAL in the rear, my traction control light will come on and vibrate/try and correct itself when I take turns at certain angles and speeds. Im not taking them super fast but seems like it will randomly do it and it pisses me off because im affraid it will actually make me wreck one day. Anyone else have this problem or have it happen to them? Is it something I should be worried about or what can I do to fix it?

 

Need to recalibrate the vsc most likely.

 

How do I do that?

 

Search for recalibrate vsc. There is a pdf somewhere im on my phone or would link it to you.

 

Jump #4 & #12 DLC pins. While sitting on a flat surface, turn the key to the 'ignition' position without starting the vehicle. Observe that the VLC light blinks. You're done. Here is a .pdf that explains it...

http://www.tacomaworld.com/forum/at...45169366-lift-vsc-answer-vcs-calibration-.pdf

 

Subd

 

I came here to give some practical advice but your sig (without the dick sucking part) ruined that for about the last twelve minutes. Now I need to reread the OP. OK, here you go:
http://www.tacomaworld.com/forum/technical-chat/257444-4lo-trac-abs-kill-switch-why-why-not.html