Turbo BS Thread

cousins brah (unless it's step sis, that's ok)

 

It does get hot here

 

Accidentally had the wrong turbine outlet flange attached to the turbine housing. No matter how determined you are, stainless won't weld to titanium. Promises.

 

It looks like to start logging data on the aem fic all I need to do is put a switch on pin#13 connector#22 and to ground then start recording. I hope its that easy. Is it just a simple on/off switch and power ground or signal ground ? @arcenik @vasinvictor

 

Not with that attitude

 

I used to just use a screen recording app on my laptop this way I could record to programs my aem app and an obdii app that showed my fuel trims.

https://m.youtube.com/watch?v=b2lEIg9Bv8E

 

@Jstand You can log without the switch. If you have the FIC software open on your laptop (and connected obviously), you can start a log with a keyboard shortcut or go to the menu up top where it says "Logger" and you'll see a Start Logging option. I'm on vacation so I'm not near my truck to have it connected, but I have my laptop so I know it's Logger-Start Logging

 

The instructions and video say that I need to ground the "User Switch Input" which would be simple to do or what @arcenik said too

 

Any specific app you may have used for recording and obdii

 

You can use the switch if you want to have an easy way of logging WITHOUT a laptop connected. That's what those instructions are for. Leave the log wire disconnected... Until you wire in a switch. Until then, use your laptop and hit start logging. It honestly doesn't get easier than that. No need to screen record or any of that stupid shit. Log it, and view it in AEMData.

 

Lets see what else can I overthink and make more difficult. but anyway thank I'll start logging and get this thing tuned.

 

But you can’t log ltft and stft which is very important.

 

Lol you said it, not me! I'm waiting til I get mine tuned before I add a switch. I'll also be adding a dual map switch so I can go between E85 and 93. But until then, I just bring my laptop with me and log that way.

Mostly so I can do this

 

so much HP at 6000 rpms...

 

and for the bama haters... we cracked the top 10 (can't be number 1 at everything, but we try)
http://www.al.com/news/index.ssf/2018/04/alabama_city_7th_best_place_to.html

 

If only we could hit 6000 rpms

 

I know someone who can, and makes 272 whp and 322 ft/lbs (if memory serves correctly)

 

Yep that's about how I'm feeling as far as hp gain. I think my expectations are too high but we'll see after its tuned.