1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Turbo BS Thread

Discussion in 'Performance and Tuning' started by Clay_916, Mar 20, 2017.

  1. Jun 27, 2017 at 5:51 PM
    #1641
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    Found my oil leak
    20170627_194912.jpg that hose barb on the return must have caused a bit of binding and wore thru... Hydrolic lines are replacing
     
    Torspd and MadTaco461 like this.
  2. Jun 27, 2017 at 6:40 PM
    #1642
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
  3. Jun 28, 2017 at 10:01 AM
    #1643
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    24,221
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Whatcha making there?
     
  4. Jun 28, 2017 at 10:05 AM
    #1644
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    that's my skid plate, just cutting it out from some IC air flow, V for vendetta style. had some issues with the plasma cutter last night it was flashing a fault code so had to try and figure out if the flashes were 1 second apart or 1.2 haha, I think it had a bad electrode or something but got it workin again. hopefully another night this week and maybe Saturday and ill be pretty close to wrapping this project up.
     
  5. Jun 28, 2017 at 10:08 AM
    #1645
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    24,221
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    :anonymous:


    Get it?^^^
     
    yota243 likes this.
  6. Jun 28, 2017 at 10:08 AM
    #1646
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    my wife saw me scrolling thru on my phone and asked if this was a picture of a penis :bananadead: (just caught a glimpse of the index haha)
     
    MadTaco461 and Torspd like this.
  7. Jun 28, 2017 at 10:09 AM
    #1647
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    nice
     
  8. Jun 28, 2017 at 10:09 AM
    #1648
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    24,221
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
  9. Jun 28, 2017 at 11:38 AM
    #1649
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    12,798
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    Might be able to get to the junkyard this weekend! We got some low summer temps coming in finally.
     
    boostedka and yota243 like this.
  10. Jun 28, 2017 at 12:34 PM
    #1650
    Jstand

    Jstand Well-Known Member

    Joined:
    Jan 24, 2017
    Member:
    #208506
    Messages:
    1,125
    Gender:
    Male
    First Name:
    Jason
    Irving,Tx
    Vehicle:
    2011 Tacoma DC TRD SR5 4x4
    I'd like to change the sound of my truck without spending a lot of money on exhaust maybe a cheap flow master and 3 inch pipe after that has anybody done that and which muffler did you use
     
  11. Jun 28, 2017 at 12:49 PM
    #1651
    boostedka

    boostedka Well-Known Member

    Joined:
    Sep 29, 2011
    Member:
    #64367
    Messages:
    5,708
    Gender:
    Male
    First Name:
    James
    NM
    Vehicle:
    2013 DCSB 6MT, 2004 4runner
    Do you want it for sound, performance? Both?
     
  12. Jun 28, 2017 at 12:55 PM
    #1652
    Jstand

    Jstand Well-Known Member

    Joined:
    Jan 24, 2017
    Member:
    #208506
    Messages:
    1,125
    Gender:
    Male
    First Name:
    Jason
    Irving,Tx
    Vehicle:
    2011 Tacoma DC TRD SR5 4x4
    Yea it would be both unless it's too much then just sound
     
  13. Jun 28, 2017 at 1:48 PM
    #1653
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    any straight through muffler is going to be superior performance wise to a chambered muffler, the guys on engine masters seem to lean towards the gibsons but they also almost exclusively run v8's so take that with a grain of salt I suppose. straight thru mufflers are typically cheaper also but almost always louder. I have something like this on mine and its pretty loud
    https://www.amazon.com/Magnaflow-18...ts=p_n_feature_keywords_browse-bin:4711457011

    but a larger diameter should, at least at lower rpms should be a little tamer somethin like this
    https://www.amazon.com/Vibrant-1146...ts=p_n_feature_keywords_browse-bin:4711457011
     
    Torspd and Jstand like this.
  14. Jun 28, 2017 at 2:08 PM
    #1654
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    12,798
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    I'm just 2.5" straight pipe, no cat. Performance and more sound.
     
    Jstand likes this.
  15. Jun 29, 2017 at 5:30 AM
    #1655
    yota243

    yota243 Well-Known Member

    Joined:
    Aug 22, 2012
    Member:
    #85267
    Messages:
    21,098
    Gender:
    Male
    First Name:
    E.J.
    north Alabama
    Vehicle:
    turbo 05 prerunner trd off road DC
    Bw s256 turbo with 3 in glass pack dumped pre axle raptor liner bed and top rails and fenderflares and rocker panels. Hunter side steps. Plasti-dipped upper fenders and emblems. satin black spray paint here and there inside and out. 5100's set to 1.75" up front . C channel front bumper. Maxxis bighorn 255/85/16
    here is an uphill, windows down kicked out of OD sitting at about 0 psi (again v6 so it isn't a great comparison for you but still)
    https://www.youtube.com/watch?v=zx_DBHAkYvA
     
    Jstand likes this.
  16. Jun 29, 2017 at 6:18 AM
    #1656
    boostedka

    boostedka Well-Known Member

    Joined:
    Sep 29, 2011
    Member:
    #64367
    Messages:
    5,708
    Gender:
    Male
    First Name:
    James
    NM
    Vehicle:
    2013 DCSB 6MT, 2004 4runner
    I used a Gibson muffler on mine. 2.5" in and out. It's barely louder than the stock exhaust. Most people don't even notice it's aftermarket at all. It definitely allowed it to rev much smoother than the stock restricted exhaust. I'll post the link when I have chance
     
    MadTaco461, Jstand and yota243 like this.
  17. Jun 29, 2017 at 7:31 AM
    #1657
    boostedka

    boostedka Well-Known Member

    Joined:
    Sep 29, 2011
    Member:
    #64367
    Messages:
    5,708
    Gender:
    Male
    First Name:
    James
    NM
    Vehicle:
    2013 DCSB 6MT, 2004 4runner
    Jstand likes this.
  18. Jun 29, 2017 at 11:02 AM
    #1658
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    12,798
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    Stopped by a wrecking yard that is along my work commute. They would not give me the time of day when asking for specific parts. Parts he did have where crazy expensive. Doing swaps with OEM parts is a pain. Luckily the place I'm going to over the weekend has a pick a part. Probably would of been easier swapping in a T56 instead.
     
  19. Jun 29, 2017 at 12:02 PM
    #1659
    Torspd

    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    24,221
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Don't have any facility similar to a Pick-A-Part there?
     
  20. Jun 29, 2017 at 12:19 PM
    #1660
    MadTaco461

    MadTaco461 BRO runner

    Joined:
    Dec 30, 2009
    Member:
    #28470
    Messages:
    12,798
    Gender:
    Male
    First Name:
    Mike
    CA
    Vehicle:
    99 turbo 5 lug long travel
    Kinda stock
    There is. Should be going there this weekend.
     

Products Discussed in

To Top