upTOP Overland Racks and Accessories - NOW WITH FREE SHIPPING (CONUS ONLY)

Ya. I wish more Rack companies would put pictures of the individual options or at least say what Cutout is with what on their Marketing Images. I ordered my Bravo with the ExtremeLED Cutout but I'm wondering how the Universal 40" cutout looks. I hope its not a pain sticking with one brand of LED light. Is ExtremeLED a good company? I dont want their light to go out. Company goes away and Im stuck with a fairing for a specific light.

 

we offer fairing swaps should you want to do that in the future

 

Awesome. damn more and more I'm so glad I went with you guys. Awesome customer service

 

That is what the front fairing of the Bravo looks like. There is the stylized "U" on the front and that's it.
ETA:
On the sides there is a smaller "U" at the rear. If you zoom in you can see it in this pic:

 

Damn. That looks good. I can't wait to get my stuff in.

Drew,
What size T-Slot nut goes into the SLOTS on the rack? I have a container full of various sizes I got off Amazon. i'm hoping it works.

 

Awesome. I’m not against a brands logo btw, at all. In fact if you offer decals with the racks, I’ll even throw that on my truck as well. Lol.

 

10 series

 

what he said LOL

 

Love mine!

 

For those of you that installed one of these Racks with LED light bars, specifically the ExtremeLED ones. How did you wire them up. Do you need a switch for them or are they remote control? I've seen that they have a remote control, but I'd prefer a switch setup. Also, where did you run the power wire? I've seen people run it behind the windshield trim but that scares me a bit.

 

You need a switch possibly 2 if you want to separate amber/white to work independently. I ran mine thru thinFIN to power trays relay in engine compartment.

 

AFAIK the thinFIN wont work with your 2020. Your options are to (recommended by upTOP) drill a hole in the roof and run the wires through a grommet into the cab, then wire up a switch and relay. ExtremeLED probably sells a wiring kit with a basic switch, you can get a Toyota sized (large or small) switch and swap it out for that.

I ran my wires down the windshield trim, which upTOP doesn't recommend, but so far so good for me. I took some pictures earlier in the thread.

 

Thanks. Ya no way in hell I'm drilling through the cab lol. Maybe i should get a snorkel and run the wire inside it LOL. J/k. Or am I? I guess I'll have to try the Windshield Trim way. We'll see.

or I could route it to the back and come down the Bed Rack .

 

I think those are viable options. Running it down the back is going to be a long run, so you'll need to up the wire gauge probably.

 

How can we verify this? I’d rather use the thin fin if I could
@upTOPoverland

 

You should be able to tell with your eyes. I think pre 2020 the fin was like an inch away from the edge where the early 2020 models were further away.

 

Ordered my Bravo rack and a few handles last night.. Pretty excited for this! I don't plan on running a light bar so no cut out for me.. Asked a question on IG and got a response within minutes.. This is the type of customer service that pushed me to go with upTOP. When you need to get in touch with someone, they're around

 

only time you wont get us is if we are on a trip of our own or asleep.

we are camping tonight so well see you tomorrow

 

My roof is ready. Just needs a rack.

 

Anyone have a link to buy more of the t nuts and bolts for the UpTop tracks?

.... I seem to have lost mine for my chop and shuv mount.

I looked through the thread a bit but at 122 pages it’s lost in there somewhere

@upTOPoverland

I only need 4 for that backer right? I think it’s the new style with the 2 plates