Want to put 2011 Scion TC wheels 18' x 7.5" on my 06 5 lug

Recently took possesion of my 6th toyota, an '06 Taco 2.7 reg. cab 5 lug. Want to put 2011 Scion TC wheels 18' x 7.5"
Any Advice or recomendations?

 

Put 17x7 Dodge Charger wheels on mine. Didn’t like the 8” wide because they stuck out. The offset +24 on these work great.

 

I’ve seen it done on 89-94 Toyota pickup just not tacos. Will prolly have to have the hub bore machines out tho, maybe a spacer.

 

scion TC wheels are 5x100 no?

 

No. They are 5x114.3 or 5x4.5.

 

Up to 2010 the Tc was running a 5x100 bolt pattern, in 2011 they switched to 5x114.3 so you're good to go with these.

I like this site below for checking ALL OEM wheel specs, though they do not include pics sadly so you need to hunt for styles separately... You can also search by size and it will show you any wheel ever made by every manufacturer in your preferred dimensions. I used this to help my search and I think I will be running some 2012~ IS 350 wheels soon!

Your wheels and the Scion wheels have a 60.1 center bore, so you dont need to find a wheel machine shop in you're area to bore them out. I am going to have to do this on my 1st gen once I locate my wheels for a decent price..

Hope this helps, and let's see some pics when thy're mounted please!

 

lucky my CB is 67.1 I have to machine most OEM wheels

 

Same here, anyone ever try swapping to a 60.1 hub with maybe a Corolla steering knuckle?!! I tried searching for this but no avail....

 

It is cheaper to machine the wheels than it is to replace suspension components.

 

Yup, I ended up getting these Lexus IS wheels center bores machined for $100 for all 4.

The wheel specific machine shop had specs to take out just enough to clear the hubs, yet plenty of metal left to keep the center caps on!



Went with Toyota center caps of course..


So did you get your Scion wheels OP?!