What Have You Done To Your 2nd Gen Tacoma Today?

got it stuck for an hour and a half...sucked cuz i was by myself with my cousin and we didnt get out till 4

 

PICS!!!!!

 

265/70/17 goodyear duratracs and XD Enduro 122

 

Getting my new axle this weekend $350. drum to drum so I can get my ass back in gear. Pardon the pun. Did my window lockout light in Indigo to match my dash. Did my wife's lockout on her Rav-4 too. Next she get's the dash mod. Blue is the new gold.

 

Got a tire replaced due to a nail in the sidewall. Glad I bought Americas tire warranty certs when I bought the tires; cost me $53 instead of $271 for a new one.

 

ordered some clear corner lights off ebay and also ordered a grillcraft from truckalterations.com, gave myself some early christmas gifts

 

Rear leaf TSB and Grillcraft w/color matched grill.

 

Finished my ScanGauge II Blend Mount installation. Had cable under headliner but wadded up on dash. Today, took off A-pillar and routed cable down then pushed it under dash. Coiled ScanGauge II cable and put behind kick plate. Wire tied Cat5 coupling to harness and made connection to OBD2 port.

Wire routing went so fast that I did the dome / map light mod. I was happy to see that diode was not necessary. I disconnected the connector, pulled the tab, and stuck a mini-blade screwdriver into each connector terminal. Prying lightly allowed wires to be pulled out and reversed (white wire in middle and white wire with stripe to outside. I stripped about 3" off end of wire to be run to dome light and stuck it into the empty slot. Reassembled the connector. When I plugged the connector back in, I made sure to capture the stripped wire on the ground wire blade and stay clear of the hot blades. I fished the wire across the headliner to the dome light. I double checked which end of the bulb turned on the map lights. I didn't have a screw the proper size so I once again stripped off about 3", fed it through the dome to the bulb side, and trapped the wire in the clip with the bulb. I may go back in and make a more permanent connection if I go in and install LEDs.

Rod

 

Have front hitch receiver from CBI on order for about 4 weeks now. Should be here in time for Christmas. Ordered illuminated 4x4 switch kit on eBay. Should have it next week. $$$ for mods adding up.

Rod

 

looked at it and it is soooo shiney......but its almost salt on the road time

 

i'm working on my Satoshi grill and the custom emblem from metalmiller is in work!

 

I looked at my Truck and said Damn this truck is Badass

 

Me too

 

HI FIVE !!!!!!!!!!!!!!!!

 

fixed my squeaky door.

 

fucking sweet!

 

5.2 litres of Mobil 1 5W30 and stock Toyota Filter... and also drained out the old oil

 

i thinky you cuz that no look like a door ......

 

my entire fender was pushed back due to an accident awhile back. so i had to move the entire fender forward and out. so i had to take off everything. and i put in my foglights too since my bumper was out

and no, if i was i'd still be out there in the morning doing it lol